topic Re: same dimensions result into different splines in Fusion Design, Validate & Document Forum

topic Re: same dimensions result into different splines in Fusion Design, Validate & Document Forum https://forums.autodesk.com/t5/fusion-design-validate-document/same-dimensions-result-into-different-splines/m-p/5857233#M283853 Hello jiang.peng,     When creating the spline, if you make sure the reference points are present and dimensioned, and you pick these, the splines are created as expected, every time, I tried this for like 30 times, so I'm guessing that it is repeatable.   If you pick arbitrary points for the spline and align the points by dimensioning and/or constraining them, the splines will deviate depending on where you have put the initial spline points.   So you end up with a different spline, even with the same dimensions.   It is as you have stated, it seems that the spline ratio is not recalculated when the spline points are realigned/moved.   So for now, probably best to use some dimensioned construction geometry to pick the spline points, and do not use random spline points to align later.   Here is a short Screencast: <A href="https://screencast.autodesk.com/main/details/717be95a-e575-41fb-822b-7e45ebf355b3" target="_blank">https://screencast.autodesk.com/main/details/717be95a-e575-41fb-822b-7e45ebf355b3</A>     Hope is of any help.   Best regards, Ludo   Mon, 12 Oct 2015 11:55:29 GMT LMD001 2015-10-12T11:55:29Z