https://forums.autodesk.com/t5/fusion-design-validate-document/same-dimensions-result-into-different-splines/m-p/5851422#M283839 <P>Claas, you're right, this is super weird.. I tested it out and I got three different results...</P><P>&nbsp;</P><P>Sketch 2 is referenced to sketch 1. Sketch 3 is completely unlinked but with same constraints and dimensions. All three are different..</P><P>&nbsp;</P><P>They all have smooth constraints to horizontal lines at ends, vertial constains in middle spline control point line, which is colinear to midpoint on the vertical line.</P><P>&nbsp;</P><P>I've attached the f3d below.</P><P>&nbsp;</P><P><IMG src="https://forums.autodesk.com/t5/image/serverpage/image-id/193133iCE349866ED943DE9/image-size/original?v=mpbl-1&amp;px=-1" border="0" alt="Spline Deviations 01" title="Spline Deviations 01" /></P><P>&nbsp;</P><P><IMG src="https://forums.autodesk.com/t5/image/serverpage/image-id/193134i627B7BAAB7C38D81/image-size/original?v=mpbl-1&amp;px=-1" border="0" alt="Spline Deviations 02" title="Spline Deviations 02" /></P> Thu, 08 Oct 2015 03:43:13 GMT Anonymous 2015-10-08T03:43:13Z