https://forums.autodesk.com/t5/fusion-design-validate-document/2d-drawings-moving-dimensions/m-p/5852883#M283697 <P>Hi All,</P><P>&nbsp;</P><P>You may be able to tell im on a 2D drawing binge right now. This part im doing has a tightly controlled shaft, and the drawing also has a cross section view above it. This has left little space for the tollerance info on the annotation.&nbsp;</P><P>&nbsp;</P><P>I have attached an image to show what I mean. I need to move the text down and to the right, but when I use the move tool, it moves the whole thign and dissasociates the witness lines with the points they are measuring. If I try and create a new dimension, when I move the text to the new position, it snaps into reading the two points in the other axis.&nbsp;</P><P>&nbsp;</P><P>Any ideas how I can just click the text and move it to a more convinient place with the leaders and witness lines following?</P><P>&nbsp;</P><P>Thanks,</P><P>&nbsp;</P><P>Pete.&nbsp;</P><P>&nbsp;</P> Thu, 08 Oct 2015 17:39:34 GMT Anonymous 2015-10-08T17:39:34Z