https://forums.autodesk.com/t5/fusion-design-validate-document/fusion-360-on-mac-almost-unusable/m-p/5855563#M283643 <P>Wow Gang! you folks sure are busy in the fixin' department! Please bear with me, as I was quite scared yesterday, as my new job is depending on Fusion and the CAM ( Lathe) mostly, as I haven't been a Lathe CNC guy, and I'm swimmin' with the sharks there! When I first opened my Fusion (30day test) a few weeks ago, I played some preference changes, and closed the program ( thinkin' that would 'lock' the new datas,when I had my first "Fusion quit unexpentantly" alarm, and I sent the report. YES, I've had 2 updates since my start, and it seems 2 updates ago is when my hassles started. ( now I probably only have 2hrs of time on the machine, and have not experienced any of the descriptions mentioned as yet. My biggy is I need the ( Boring bar: Inside profile for the CAM part to get anything accomplished. I have 2 (private) jobs to play this wknd, and I have a couple other personal projects which we can use as experimentals ( I'm the Tutorialist for Turbo CAD Mac, and a few of my vids are on public status on You Tube. My Captain Canardly name will show as a RCGroups blog, which will link you to my You Tube. More later, I'm gettin' some 'alone tyme' with the Fusion now! Oh yes- I did get excellent results Via the Fusion STL Import/and export to &nbsp;the Print Studio: The best supports I've ever seen, along with a very tight resolution ( with Sailfish installed on my makerblot 2X!</P><P>Johnny</P> Sat, 10 Oct 2015 03:49:56 GMT Anonymous 2015-10-10T03:49:56Z