topic Uploading .dxf files to Fusion 360 in Fusion Design, Validate & Document Forum

Uploading .dxf files to Fusion 360

Anonymous — Wed, 02 Dec 2015 18:13:11 GMT

Hello,

Having successfully updated my graphics driver to be able to view the data panel correctly I am now attempting to upload .dxf files. We have a Leica Disto S910 laser that formats to .dxf for file extraction, but when I try to upload a file it continuously says that it fails. Now I took a previous AutoCAD drawing that I saved as a .dxf file in order to be able to transfer it to another CAD program, and that file loads correctly. Normally I can upload .dxf files from the laser directly into AutoCAD with no problem, but I would like to send the file directly to Fusion 360 and skip the step in between. Is there a way for me to upload the .dxf files from the laser or must the file first be saved from AutoCAD in order to correctly upload into Fusion 360?

Thanks,

Ozzie

Re: Uploading .dxf files to Fusion 360

NicolasXu — Thu, 03 Dec 2015 08:44:35 GMT

Hi Ozzie,

Fusion 360 can read the .dxf file contains 3D information, but I’m not sure if the files from the laser can be read directly. Would it be possible to send us a sample .dxf file so we can have a closer look?

Best Regards,

Re: Uploading .dxf files to Fusion 360

NicolasXu — Thu, 03 Dec 2015 08:47:41 GMT

If the file could be shared but you don't want posting it publicly, you may send me via email: lixiong.xu@autodesk.com

Re: Uploading .dxf files to Fusion 360

HughesTooling — Thu, 03 Dec 2015 09:56:30 GMT

There have been some problems importing DXF files if the file doesn't contain any layers. Most programs will at least put the info on Layer0 but some don't and Fusion will not import those files.

Mark

Re: Uploading .dxf files to Fusion 360

Bela_DEMO — Wed, 22 Nov 2017 00:32:58 GMT

Hello

any news about this topic? Is it possible to direct import Leica DISTO™ S910 data?

Thank you

Béla

Re: Uploading .dxf files to Fusion 360

thebrown.ml — Wed, 05 Jul 2023 20:21:29 GMT

6 years later? Is it possible to transfer directly to fusion with the Disto transfer as possible in Autocad?

https://shop.leica-geosystems.com/measurement-tools/disto/disto-transfer-software-pc

Re: Uploading .dxf files to Fusion 360

HughesTooling — Thu, 06 Jul 2023 12:34:44 GMT

@thebrown.ml wrote:

6 years later? Is it possible to transfer directly to fusion with the Disto transfer as possible in Autocad?

https://shop.leica-geosystems.com/measurement-tools/disto/disto-transfer-software-pc

It would be upto Leica to create an add in for Fusion.