topic Re: Sculpting T Splines in Fusion Design, Validate & Document Forum

Sculpting T Splines

Anonymous — Sun, 06 Dec 2015 12:06:48 GMT

Hello,

I have a T splines form and I would like to sculpt it.

The thickness is 10 mm. However I would like a variable thickness : from 10 mm at the center to 2 mm at the border. Like that from the side view :

I wanted to trim but that goes to Patch Module and I cannot back to T Splines module.

How can I do?

What I am trying to make it's a kitesurfing board like this one :

I shaped first the outline, then did the thickness(10 mm). Then I wanted to trim like I explained above and at last to work with T splines in order to make concave, channels...

Thanks for your help

Re: Sculpting T Splines

Anonymous — Sun, 06 Dec 2015 12:44:07 GMT

Here a screenshot showing my problem : I cannot work with T splines defined before.

Re: Sculpting T Splines

TrippyLighting — Sun, 06 Dec 2015 13:37:21 GMT

You are approaching this the wrong way.

The model has an unnecessarily high number of segments. I am not at my fusion machine at the moment but will post a screencast later.

Re: Sculpting T Splines

Anonymous — Mon, 07 Dec 2015 15:58:37 GMT

Hello,

I achieved to reduce my thickness :

However now I would like to add channel and concave at the bottom(where it's flat) like that :

I wanted to use T-Splines but I cannot anymore. How would you do?

Thanks !