topic Re: Extruding Edges in Sculpt-Mode in Fusion Design, Validate & Document Forum

Extruding Edges in Sculpt-Mode

Anonymous — Mon, 11 Jan 2016 06:13:45 GMT

Hey Guys,

i have a problem that is driving me nuts. I saw this video where someone models a guitar using T-Splines in sculpt mode.

I have linked the video. You can see that he will create a simple plane with no subdivisions. Then he starts extruding and new subdivions are added.

I cant get that done myself!

I dont know what to do? Could be something in the settings, because as you can see in the video it is pretty straight forward via the Edit-Face Command.

I hope someone can explain this to me!

Im really happy to see that this is somehow possible. Ive always avoided the sculpt environment because ive tried this before and because it didnt work and i thought its not possible. Glad to see it somehow works!

Re: Extruding Edges in Sculpt-Mode

TrippyLighting — Mon, 11 Jan 2016 13:03:02 GMT

I made that video.

Once you are in the Sculpt environment, right clic into the open area and the pie-menu comes up. select "Face" and pick 4 points on the grid to define the face. Close the command by pressing the escape button.

Right click again into the open space and select "Edit form". Then select an edge. The 3D manipulator will show up on the center point of that edge allowing you to manipulate that edge, e.g. change it's location, rotation and scale. If you hold down the ALT key while moving the manipulator it will extrude an additional edge from the existing one.

Re: Extruding Edges in Sculpt-Mode

Anonymous — Mon, 11 Jan 2016 13:18:05 GMT

Hey TrippyLighting,

thanks for the quick answer. Thats great. I already tried it. Total Game-Changer for me concerning the sculpt environment.

Great Vid and thanks again!

Re: Extruding Edges in Sculpt-Mode

Anonymous — Sat, 05 Jan 2019 12:12:07 GMT

Reviving an old thread, I'm trying to modify - edit form, select edge and holding alt key, dragging with the left click to create a copy edge, but somehow for me this trick does not work. My alt key is working, but in fusion does not want to work. There are any tricks/settings which should I know to create another copy edge with the alt key?

Thanks

Re: Extruding Edges in Sculpt-Mode

TrippyLighting — Sat, 05 Jan 2019 14:18:15 GMT

Can you create a screencast of that behavior ?

Re: Extruding Edges in Sculpt-Mode

Anonymous — Sat, 05 Jan 2019 16:21:46 GMT

Thank you for answering

I attached the link, please tell me if is not working

https://autode.sk/2LR1Osz

edit: Also if you do not mind, can you please tell me how he managed to make thread to that model?

https://www.thingiverse.com/thing:3038926

Because I do not know how to make a solid cylinder from sculpt mode in order to attach a thread from model mode

Re: Extruding Edges in Sculpt-Mode

Anonymous — Fri, 11 Jan 2019 10:23:07 GMT

Hello Trippy,

Do you have any advice which could help me regarding the above mentioned issue?

Thank you

Re: Extruding Edges in Sculpt-Mode

TrippyLighting — Fri, 11 Jan 2019 10:59:08 GMT

You are actually extruding new polygons in that screencast. If you turn on Box view mode and set shading to shading with visible edges you'll see that.

To get the twist, you have to enable "Soft modification" in the "edit form" UI and then pivot the selected edges.

Re: Extruding Edges in Sculpt-Mode

Anonymous — Fri, 11 Jan 2019 11:44:29 GMT

Trippy you're truly a master, thank you for the explanations