https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005567#M273799 <P>I'm having issues with doing a revolve with a circle next to a tangent. This part should be symmetrical, and you can see how it kinda goes together as it's just a circular bar on a path. I've been having a bad time with circles revolving around tangents, and the current way I've done it worked before, but is not working again. I was wondering if there's a fix to this? I've tried using a path along the entire thing, and it doesn't like revolving a circle around it's tangent either. I'm going to work around it for now, but since I've encountered multiple, different errors trying to do this, I thought you guys should take a look at it? If you try to revolve the top circle to the bottom using the axis in sketch 10, you get the c math library error. If you try the other way, 90degree turn from the bottom to the top bit (which worked previously) you get a general modeling error. I'm terrible at explaining things so I hope this makes sense with the model.</P> Mon, 25 Jan 2016 21:01:08 GMT Anonymous 2016-01-25T21:01:08Z https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005567#M273799 <P>I'm having issues with doing a revolve with a circle next to a tangent. This part should be symmetrical, and you can see how it kinda goes together as it's just a circular bar on a path. I've been having a bad time with circles revolving around tangents, and the current way I've done it worked before, but is not working again. I was wondering if there's a fix to this? I've tried using a path along the entire thing, and it doesn't like revolving a circle around it's tangent either. I'm going to work around it for now, but since I've encountered multiple, different errors trying to do this, I thought you guys should take a look at it? If you try to revolve the top circle to the bottom using the axis in sketch 10, you get the c math library error. If you try the other way, 90degree turn from the bottom to the top bit (which worked previously) you get a general modeling error. I'm terrible at explaining things so I hope this makes sense with the model.</P> Mon, 25 Jan 2016 21:01:08 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005567#M273799 Anonymous 2016-01-25T21:01:08Z https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005688#M273800 <P>YPou could not possibly be convinced to attach your model in a Fusion 360 native format such as .f3d. It's one of the export options.</P> Mon, 25 Jan 2016 21:56:24 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005688#M273800 TrippyLighting 2016-01-25T21:56:24Z https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005913#M273801 <P>I actually figured out my issue. Weirdly enough it was allowing me to make a 90 degree turn about a tangent axis once, but not twice in two seperate directions. I just added .01 to curves and it worked. Sorry to have been a waste of time! (If I could delete this thread I would've.) I'm sure it was having some issue with a zero distance to an axis to revolve around.</P> Tue, 26 Jan 2016 00:49:53 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/6005913#M273801 Anonymous 2016-01-26T00:49:53Z https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/11995927#M273802 <P>Hi!</P><P>Im happy you didnt delete this threat- it was actually very helpful, thanks!</P> Mon, 29 May 2023 11:49:26 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/c-math-library-error-and-general-modeling-error/m-p/11995927#M273802 mark_3 2023-05-29T11:49:26Z