topic Re: sketch demensions not showing up in Fusion Design, Validate & Document Forum

sketch demensions not showing up

davekott — Tue, 26 Jan 2016 23:31:32 GMT

After the last update if i turn off sketch constraints, save and close the drawing, then reopen the drawing and sketch the dimensions will not be displayed.

If i turn constraints back on save, close, and reopen the dimensions will be back.

Re: sketch demensions not showing up

neljoshua — Tue, 26 Jan 2016 23:58:47 GMT

Someoine else mentioned this issue; it may be a bug. See the post below.

http://forums.autodesk.com/t5/design-validate-document/show-constraints-bug-hides-dimensions/td-p/6006683

Re: sketch demensions not showing up

Phil.E — Tue, 26 Jan 2016 23:59:15 GMT

Yes this was covered earlier today:

http://forums.autodesk.com/t5/design-validate-document/show-constraints-bug-hides-dimensions/td-p/6006683

It's a known issue and is already fixed in development. Not sure when the fix will be delivered yet, either very soon, or at the latest in 6 weeks or so.

Thanks for reporting!

Re: sketch demensions not showing up

Anonymous — Wed, 07 Jun 2017 18:53:55 GMT

While Sketching in fusion the numbers that dictate my demensions are not showing.

Re: sketch demensions not showing up

Phil.E — Wed, 07 Jun 2017 19:01:16 GMT

@Anonymous

Hi and welcome to the Fusion 360 community.

This is surprising news. Does it happen 100% of the time, or just some of the time?

I would like you to try a couple things related to graphics.

Can you check your Graphics Diagnostic information for Fusion? There is a tool that gathers this information, it is found under the ?Help menu in Fusion. Look for "Graphics Diagnostic", click on that.
When the dialog appears, use the "copy to clipboard" button, then paste the results into a response here.

Next, reboot your computer. Try again to sketch in Fusion, do you see the same missing dimension numbers problem?

Sorry for the trouble, let me know if you have any questions.

Thanks,