https://forums.autodesk.com/t5/fusion-design-validate-document/fusion-unable-to-cut-shape/m-p/6252821#M266283 <P>I created a extrusion and then a sketch off of that extrusion and was then going to cut out of the extrusion with the new sketch. While attempting to cut the sketch out I got this error:&nbsp;</P><P>&nbsp;</P><P>"There was a problem combining geometry together.&nbsp;</P><P>If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where the faces and edges are nearly coincident)."</P><P>&nbsp;</P><P>So the cut wouldn't allow me to come all the way to the outside edges of the extrusion. Any help would be greatly appreciated.&nbsp;</P> Tue, 05 Apr 2016 17:56:30 GMT Anonymous 2016-04-05T17:56:30Z https://forums.autodesk.com/t5/fusion-design-validate-document/fusion-unable-to-cut-shape/m-p/6252821#M266283 <P>I created a extrusion and then a sketch off of that extrusion and was then going to cut out of the extrusion with the new sketch. While attempting to cut the sketch out I got this error:&nbsp;</P><P>&nbsp;</P><P>"There was a problem combining geometry together.&nbsp;</P><P>If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where the faces and edges are nearly coincident)."</P><P>&nbsp;</P><P>So the cut wouldn't allow me to come all the way to the outside edges of the extrusion. Any help would be greatly appreciated.&nbsp;</P> Tue, 05 Apr 2016 17:56:30 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/fusion-unable-to-cut-shape/m-p/6252821#M266283 Anonymous 2016-04-05T17:56:30Z https://forums.autodesk.com/t5/fusion-design-validate-document/fusion-unable-to-cut-shape/m-p/6253476#M266284 <P>Please share your model. This is hard to evaluate without access to the actual geometry.</P> Wed, 06 Apr 2016 00:26:22 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/fusion-unable-to-cut-shape/m-p/6253476#M266284 TrippyLighting 2016-04-06T00:26:22Z