topic Re: Exporting to 3D print utility in Fusion Design, Validate & Document Forum

Exporting to 3D print utility

joe — Fri, 15 Apr 2016 03:15:02 GMT

When I export an STL to a 3D print utility the file name is a long series of letters and numbers (see pics) Where is this file name coming from? It appears to be random from utility to utility. I use Kisslicer but also tried Meshmixer and Cura

Re: Exporting to 3D print utility

bob_holland — Mon, 18 Apr 2016 18:58:59 GMT

@joe,

Thank you for your post.

I agree that if you ask to save a name like "test 2" out of Print Studio, you should not get:

test 2_3d57ca29-9d11-4f69-b6eb-9100fdbeeba1.stl

I have asked our development staff to look into this.

Your tracking issue for this is: FUS-24178

Thank you for your patience.

Re: Exporting to 3D print utility

joe — Sun, 08 May 2016 11:35:56 GMT

Progress on this?

Re: Exporting to 3D print utility

bob_holland — Mon, 09 May 2016 20:42:04 GMT

@joe,

I have heard back form our development staff and they have identified the issue as being with the Print Studio application.

It runs outside of Inventor.

At this time I do not know if Print Studio will be addressing this.

Thank you for your patience.