topic Re: Rule Fillet crashes Fusion when using against features in Fusion Design, Validate & Document Forum

Rule Fillet crashes Fusion when using against features

nkloski — Mon, 02 May 2016 15:34:21 GMT

Hmmm....I have created a very siomple shape and then tried to use Rule Fillet, and Fusion crashes every time when selecting "rounds". Can someone exaplin why this is happening?

Thanks!

Screencast below

https://knowledge.autodesk.com/community/screencast/1dcb465a-bfb9-48ec-a372-d03815151bb8

Re: Rule Fillet crashes Fusion when using against features

sanjay_jayabal — Mon, 02 May 2016 15:49:59 GMT

Hi Nick,

That sure looks like a bug, I get the same result. I will follow up to get it looked at by the team internally. If you can share the geometry you are trying to achieve, I'd be happy to look for a way to get it done so you can progress with your work.

best regards,

Sanjay Jayabal.

Re: Rule Fillet crashes Fusion when using against features

nkloski — Mon, 02 May 2016 16:13:31 GMT

Thanks! I am actually recording a Fusion 360 training class, and wanting to talk about Rule Fillet, so that is entirely my end goal: to have this work for a simple demonstration! 🙂

Re: Rule Fillet crashes Fusion when using against features

sanjay_jayabal — Mon, 02 May 2016 19:48:38 GMT

Hi Nick,

In the example that you had shown in your screencast, the edges between the vertical (patterned) boxes and the top surface of the first box would have to be fillets. The edge of the first box that is broken by adding the vertical boxes would be a round. Of course this shouldn't lead to a crash (I actually got into a non-responsive state), but I was wondering if it is an option for you to do this in two operations!? If yes, then you can add the fillets first followed by the rounds (screencast below).

best regards,

Sanjay Jayabal.

Re: Rule Fillet crashes Fusion when using against features

nkloski — Mon, 02 May 2016 20:22:07 GMT

Yep, that works, thanks....I thought it good to bring up something that made Fusion hang up, in case it was a bug.

Re: Rule Fillet crashes Fusion when using against features

keqingsong — Wed, 18 May 2016 18:10:11 GMT

Thanks Nick - this is going to be fixed in our May 25 udpate.

Re: Rule Fillet crashes Fusion when using against features

Redemptioner — Fri, 27 Dec 2019 07:28:57 GMT

Most recent update has brought back the dreaded fillet crashes again.....very sad day 😞

Re: Rule Fillet crashes Fusion when using against features

laughingcreek — Fri, 27 Dec 2019 15:17:18 GMT

It helps the team a lot if you can post a repeatable example.