topic Re: Unable to make a fillet by selecting the junction in Fusion Design, Validate & Document Forum

Unable to make a fillet by selecting the junction

Anonymous — Tue, 10 May 2016 06:48:55 GMT

I am just following this,

https://www.youtube.com/watch?v=2Hd348CNQ1Q

and at 3:34 I should be able to select a line and make a fillet, I have done so before before the fusion 360 upgrade but now I seem unable to. Am I in some sort of wrong mode? or bug? or?

Re: Unable to make a fillet by selecting the junction

Anonymous — Tue, 10 May 2016 06:59:28 GMT

I select fillet but a sketch palett menu appears and not a fillet menu? Am i in a wrong mode or something?

Re: Unable to make a fillet by selecting the junction

Anonymous — Tue, 10 May 2016 07:09:58 GMT

Just made a second model, seems I have the same in-ability to make a fillet as I cannot select the line between the two sides. As far as I can tell I am following the tutorial exactly....and Ive done this tutorial a few time sperviously but now I cannot......confused....

Re: Unable to make a fillet by selecting the junction

michallach81 — Tue, 10 May 2016 07:17:24 GMT

First, you need to be in MODEL environment, second check SELECT tab, you need to have checked Body Edges option.

Michał

Re: Unable to make a fillet by selecting the junction

jeff_strater — Tue, 10 May 2016 16:11:06 GMT

it sounds like you are using the Sketch Fillet command, not the Model Fillet command. You wan this command:

Not this one:

Re: Unable to make a fillet by selecting the junction

Anonymous — Tue, 10 May 2016 19:24:58 GMT

Hi,

You are correct.....doh.

Thanks, great application and the change since Autocad14 / LT97 (last time I used a CAD program) is immense but so many options means its so easy to get lost in even simple things. 😞

Re: Unable to make a fillet by selecting the junction

Anonymous — Thu, 19 May 2016 23:32:39 GMT

My son is also doing the tutorials and had the same issue, maybe the interface needs tweaking to reduce confusion.