topic Re: Can't select the entire projected geometry. in Fusion Design, Validate & Document Forum

Can't select the entire projected geometry.

reik_001 — Sun, 10 Jul 2016 21:37:38 GMT

Hello.
Have a problem when I try to select all sketch geometries.

I project geometry from 3D model to sketch that include some small parts, and when I try to select all parts, small ones are didn't selected.

"Select Through" is off.

What's the problem?

And another one question, when I choose all geometries manually, then click "Break Link" and try to rotate, there is nothing happens, why?

Re: Can't select the entire projected geometry.

masa.minohara — Mon, 11 Jul 2016 02:24:12 GMT

Hi @reik_001,

Thank you for posting your question! Could you try turning on "Select Through" option? Or try double clicking a line to select all the connected entities?

Regarding rotating the sketch, how did you try to rotate it? Did you use Move command? Would you be able to share a public link to the design or attach the design here?

Re: Can't select the entire projected geometry.

reik_001 — Mon, 11 Jul 2016 03:06:10 GMT

Here is sketch geometry from model in attachment.

There is no changes when I turn on "Select Through" option. Double click on it select area only with few lines.
Yes, I try to rotate sketch by selecting all lines, then press "move", select pivot point, and write an angle.

Thanx for reply.

Re: Can't select the entire projected geometry.

masa.minohara — Mon, 11 Jul 2016 06:08:53 GMT

Hi,

Thank you for attaching the design! It looks like this is a known issue, and to work around this, you need to zoom in and select those small pieces of entities. I am sorry for the inconvenience.

Regarding rotating the sketch by using Move command, did you click on "Done" button after setting Pivot?

Re: Can't select the entire projected geometry.

reik_001 — Mon, 11 Jul 2016 16:29:50 GMT

Now rotation is complete, thank you for advise. For the first look this green check mark looks like seting pivot point is done )

But with selection of sketch geometries looks like a lot of unnecessary work... Hope it will fix in future.

Re: Can't select the entire projected geometry.

Anonymous — Thu, 10 Nov 2016 15:24:10 GMT

I'm very new at fusion. seem like you can't select Bodies AND components at the same time. I still don't understand the concept of bodies vs components. I am drawing shower doors. As i create an assembly, i want to "Group" it, lock it together. I.E a piece of glass with roller bracket attached and a trim piece across the bottom. If the glass is a Body and added parts are components, when i move the assembly, one or the other doesn't move, with select thru checked. so, i draw everything as a component and change all bodies to components and don't have a problem except for the quantity of small parts to be grouped.

If anyone would like to comment, i would be interested !

Norm