topic Re: Remove Part of circle in Fusion Design, Validate & Document Forum

Remove Part of circle

ludwig9GUSA — Tue, 06 Feb 2024 16:37:43 GMT

Hello everybody,

I'm really new to Fusion360 and finished/printed my first design. But I need to remove a part of a circle that holds the construction on a wooden stick. I did it after printing with a tool, but I want to implement this to my design in Fusion. How can I remove the section of the circle (should be 90°)? I attached two Images, one of the printed Part, how it should look like and one of the current design in Fusion (both top-down view). I hope someone can help me.

Best regrads

Betreff: Remove Part of circle

wersy — Tue, 06 Feb 2024 16:46:05 GMT

Re: Remove Part of circle

TheCADWhisperer — Tue, 06 Feb 2024 16:55:01 GMT

@ludwig9GUSA

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

There is no need to trim the sketch to get your geometry.

Re: Remove Part of circle

g-andresen — Tue, 06 Feb 2024 17:09:03 GMT

Hi,

no trim needed

(view in My Videos)

günther

Re: Remove Part of circle

ludwig9GUSA — Fri, 09 Feb 2024 14:51:29 GMT

sorry for the late reply, but here is the f3d file

Re: Remove Part of circle

ludwig9GUSA — Fri, 09 Feb 2024 15:11:11 GMT

Thanks for this way, unfortunatly this don't work because I already have extruded the sketch and nothing changes at the extrusion, when I follow the steps

Re: Remove Part of circle

g-andresen — Fri, 09 Feb 2024 15:29:00 GMT

Hi,

just add the profile

(view in My Videos)

günther

Re: Remove Part of circle

etfrench — Fri, 09 Feb 2024 17:54:52 GMT

If you're in Direct Modeling mode instead of Timeline mode, simply Extrude/Cut that section from the original.

Re: Remove Part of circle

ludwig9GUSA — Fri, 09 Feb 2024 17:55:26 GMT

I don't know what I'm doing wrong, but when I try to apply the Symmetry tool, I get this Error: "Failed to solve. Please try revising dimensions or constraints." What need I do to solve this?

Re: Remove Part of circle

ludwig9GUSA — Fri, 09 Feb 2024 18:08:35 GMT

also I don't understand how you change the angle at the end with the sketch Dimension tool. If I open your file I can do ith when I long press the left mouse button, while applying the tool, but with my original file that doesn't work. What can I do so it works in my file and I could possilbe change the angle?

Re: Remove Part of circle

g-andresen — Fri, 09 Feb 2024 19:30:11 GMT

Hi,

@ludwig9GUSA wrote:

also I don't understand how you change the angle at the end with the sketch Dimension tool.

In sketch 3, I first added 2 lines at arbitrary angles and arranged them symmetrically to a vertical line.
Then I dimensioned the angle between the lines (90 deg).

Günther