topic Re: boundary fill does not create solid - why? in Fusion Design, Validate & Document Forum

boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 01:50:12 GMT

I need to add a stitch command to make it solid ... but why?

Re: boundary fill does not create solid - why?

jakefowler — Mon, 15 Aug 2016 04:56:48 GMT

Are you able to share the design?

Boundary Fill works best when surfaces have a bit of overlap. Sometimes it can encounter problems with surfaces that are 'just touching', whereas Stitch will take care of just-touching conditions by connecting any edges that meet within your specified tolerance.

Thanks,

Jake

Re: boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 11:46:03 GMT

@jakefowler The boundary fill is done by using two surfaces that are overbuild well - so overlapping a lot.

That is why I am curious why this does not make a solid when it is a closed shell.

Re: boundary fill does not create solid - why?

jakefowler — Mon, 15 Aug 2016 12:18:57 GMT

@cekuhnen

This should be working fine then - sounds like an unexpected error. If you're able to share the F3D, we can certainly take a look into this.

Many thanks,
Jake

Re: boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 12:21:07 GMT

@jakefowler

Here it is: http://a360.co/2b5WTUk

Let me know what you found out!

Re: boundary fill does not create solid - why?

jakefowler — Mon, 15 Aug 2016 12:54:20 GMT

Thanks for the file! I can see the issue. We are technically making a clean solid, but the browser doesn't seem to reflect that. If I roll back to the Boundary Fill feature, Edit it, and click OK, it shows up as a solid. But then moving the timeline marker again reverts it to a 'surface' in the browser. So there's definitely something fishy going on - we'll look into this one.

Much appreciated,

Jake

Re: boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 13:28:41 GMT

@jakefowler No problem.

Re: boundary fill does not create solid - why?

HughesTooling — Mon, 15 Aug 2016 14:38:05 GMT

@cekuhnen I downloaded your file to see how you were using the Remove feature. If I try and edit the loft I get an error and if I just open the file and run Compute All the loft gives an error, am I missing something or is there a problem in the file.

Mark

Re: boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 14:40:49 GMT

@HughesTooling The loft code is not really good.

Oddly my file checks fine also in the loft command I don't get the error

Re: boundary fill does not create solid - why?

HughesTooling — Mon, 15 Aug 2016 15:02:35 GMT

In the file I downloaded the tangency weight for both profiles was set to 2.5, setting the 2nd profile to zero cleared the error, anything but zero for the second profile seems to fail.

Anyway here's an edited version without the unstitch or the removes, I just used Delete in the patch workspace. Is it any different to what you where after?

Mark

Re: boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 15:18:44 GMT

@HughesTooling Odd - why do you have Loft tool issues and I do not ?!?!?!

Re: boundary fill does not create solid - why?

HughesTooling — Mon, 15 Aug 2016 15:52:57 GMT

Mac PC perhaps, I think you use a mac?

Mark

Re: boundary fill does not create solid - why?

kb9ydn — Mon, 15 Aug 2016 16:13:35 GMT

So here's something weird, the hotkey for compute all (ctrl+B) doesn't work. But if I select it from the menu it works and flags the loft with an error.

I'm on a PC with Windoes 10 if it matters.

Re: boundary fill does not create solid - why?

cekuhnen — Mon, 15 Aug 2016 16:27:55 GMT

This is bizarre!

Re: boundary fill does not create solid - why?

HughesTooling — Mon, 15 Aug 2016 16:33:04 GMT

@cekuhnen Here's the file I downloaded, does running compute all give you any problems using this file. I wonder if the download\translation is the problem.

Mark