topic Re: [BUG] Subcomponent suddenly disappeared! in Fusion Design, Validate & Document Forum

[BUG] Subcomponent suddenly disappeared!

Beyondforce — Wed, 17 Aug 2016 13:34:20 GMT

While working on the next subcomponents, they have suddenly disappeared, they are there but not there. Watch the screencast!

But, after closing and opening the file again, it appeared again.

Cheers / Ben
---------------------------------------------------------------------------------------------------------------------------
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Re: [BUG] Subcomponent suddenly disappeared!

Beyondforce — Wed, 17 Aug 2016 13:40:22 GMT

Okay, I know what happen... inside the last sketch, I used "Slice" and when I exit the sketch, the Slice didn't turned off automatically. Sometimes it does turn off after exiting the sketch and sometimes not!

Why?

Ben.

Re: [BUG] Subcomponent suddenly disappeared!

James.Youmatz — Fri, 19 Aug 2016 15:18:22 GMT

Hi @Beyondforce,

Hmm, off of the top of my head I have a few ideas. Just to check - is this issue still present in a model you can share with me? Normally, if that ever happens to me, where something should be visible, but isn't or even may not appear in a correct location is to go to the modify menu and use a Compute All and see if that generates any warning messages or errors in my timeline. From what you saw - where there anything like that in your timeline?

Thanks,

Re: [BUG] Subcomponent suddenly disappeared!

Beyondforce — Fri, 19 Aug 2016 15:40:15 GMT

Hi @James.Youmatz

Thanks for your reply.

No, my timeline is clean. It just happened out of the blue. If it happens again, I'll you know. I just thought maybe someone else had the same problem.

Have a nice weekend.

Ben.