topic Re: Selection of a specific points in Fusion Design, Validate & Document Forum

Selection of a specific points

Peter__B — Sat, 08 Oct 2016 14:42:41 GMT

If two points are on top of each other (same position), how can choose which of them to select ? and where do I find a list of all the point's and line's definitions ?'

/Peter

Re: Selection of a specific points

Beyondforce — Sat, 08 Oct 2016 15:17:29 GMT

Hi @Peter__B,

Have you tried Left click for 2 sec.? You will get a menu and from there you will be able to select Sketches and Point.

Let me know if it helps.

Cheers / Ben
---------------------------------------------------------------------------------------------------------------------------
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Check out my YouTube channel: Fusion 360: Newbies+

Re: Selection of a specific points

HughesTooling — Sat, 08 Oct 2016 16:50:43 GMT

I see my idea for selection highlight has been implemented, hadn't noticed that before. One thing to note, in the selection list the oldest point\object is at the top newest at the bottom.

Screencast demo of selection highlighting.

Mark

Re: Selection of a specific points

jeff_strater — Sat, 08 Oct 2016 17:00:31 GMT

Thanks for noticing that, Mark!! Yes, I, also, was happy that we finally got that implemented - it was a great suggestion. Especially when you have points stacked up like that, it is so useful to be able to see what they correspond to.

Jeff

Re: Selection of a specific points

Peter__B — Sun, 09 Oct 2016 07:48:24 GMT

Thanks Ben

The function provides a very conveniant way of retrieving information about the structure.

/Peter