topic Re: [Tutorial] - How to create a Screencast. in Fusion Design, Validate & Document Forum

[Tutorial] - How to create a Screencast.

Beyondforce — Fri, 21 Oct 2016 06:09:12 GMT

Hi Guys,

When creating a screencast, please be as detailed as possible. It will be great, if you could record audio as well.

If you have any question, please let me know.

Cheers / Ben
---------------------------------------------------------------------------------------------------------------------------
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Check out my YouTube channel: Fusion 360: Newbies+

Re: [Tutorial] - How to create a Screencast.

brianrepp — Sun, 09 Oct 2016 15:21:21 GMT

This is a great idea - thanks for posting, Ben!

Re: [Tutorial] - How to create a Screencast.

Beyondforce — Sun, 09 Oct 2016 15:25:35 GMT

Yes finally, I just don't understand why it took me so long 😉

Re: [Tutorial] - How to create a Screencast.

TrippyLighting — Sun, 09 Oct 2016 16:38:51 GMT

As an addition to Ben's great screencast on how to share a screencast, this little edition explains how to embed a YouTube video into post.

I can hotly recommend the video tip on components and bodies!

Re: [Tutorial] - How to create a Screencast.

Anonymous — Sat, 26 Nov 2016 21:52:11 GMT

I have now downloaded screencast but think you should be able to answer the question i asked by looking at the picture I sent you.

Re: [Tutorial] - How to create a Screencast.

sanket223.patil — Wed, 25 Jul 2018 14:31:18 GMT

Oh , Thanks . This video helped me out . I was bit confused for Screencast . Thanks