topic Re: question in Fusion Design, Validate & Document Forum

question

Anonymous — Sun, 23 Oct 2016 17:36:50 GMT

Hi everybodi. Have someone an idea how to multiply this cut around the bowl form? I do it the sketch and after extruded + cut. Thank you.

Re: question

TrippyLighting — Sun, 23 Oct 2016 19:18:32 GMT

The screenshot is not very explanatory. You could share your design by exporting it as a .f3d file and attaching it to your next post.

Re: question

Anonymous — Sun, 23 Oct 2016 20:51:36 GMT

Thank you for reply. i do it a screecast,but i can't to save to upload.the only think what is doing to delete.maybe this picture help.

Re: question

Anonymous — Sun, 23 Oct 2016 21:05:43 GMT

after this one i working.

Re: question

TrippyLighting — Sun, 23 Oct 2016 21:34:15 GMT

I saw that the Canvas you used is in German so the screencast is in German (my native language) buy I'll write this in English 😉

You've used way too many points to define the spline curves for the design of your bodies.

That already indicates the second problem, which is that you've not followed Fusion 360's R.U.L.E #1, which also explained in one of the foundational basics videos in the Learn Section

Re: question

Anonymous — Sun, 23 Oct 2016 22:21:16 GMT

Danke fur antwort.Jetzt ich weis fur was is der OFFSET da.Meine gorsse probleme ist das: in diesem Schitzen gibt es ein ' Schragschlitz ', in der obere teile . Das will ich Uhrzeichen machen und mehr als 10 Stuck zum bei spiel. Ich habe nur ein gemacht aber wie can ich weiter gehen mit dem anderen.- copieren diese ein?

Re: question

TrippyLighting — Sun, 23 Oct 2016 22:35:13 GMT

So wie du den Schlitz gezeichnet hast werden 10 nicht funktionieren weil sich die schnitte dann überlappen. Aber der Screencast zeigt wie das im Prinzip funktioniert.