topic Re: Strange "Break link" behavior in Fusion Design, Validate & Document Forum

Strange "Break link" behavior

macmanpb — Wed, 02 Nov 2016 10:17:43 GMT

Look at the displacement of the motor after breaking the link of the component.

Re: Strange "Break link" behavior

innovatenate — Wed, 02 Nov 2016 21:54:13 GMT

I'm wondering if the below conversation may also apply here as well.

https://forums.autodesk.com/t5/design-validate-document/problems-with-xref-parts-moving/m-p/6648131#M78980

I hope that helps! Please let me know if you have any questions. If the above discussion does not help, can you share the design with me for a closer look?

Thanks,

Re: Strange "Break link" behavior

macmanpb — Thu, 03 Nov 2016 08:17:51 GMT

Hi Nathan,

The motor is grounded and rigid but the behavior is the same.

Here my designs:

Motor -> http://a360.co/2eXjSmy

4-Axis -> http://a360.co/2dZhCwi

Re: Strange "Break link" behavior

innovatenate — Sat, 05 Nov 2016 00:05:57 GMT

Thanks for sharing those. I'm currently stumped by this one.

I note if you edit RigidJoint 6 there are some missing references errors that I haven't been able to wrap my head around.

I've gone ahead and logged this issue with development reference ID FUS-28672. As soon as I learn more, I'll be sure to circle back here.

Have a great weekend!

Re: Strange "Break link" behavior

innovatenate — Fri, 11 Nov 2016 04:46:04 GMT

@macmanpb I have an update for you on this issue. The issue has been tracked down to a complication mirror component feature and, distributed design. We are targeting a December fix; however, it is still pending validation and approval. Thank you for reporting this issue to us and helping us track this down!

Re: Strange "Break link" behavior

keqingsong — Tue, 10 Jan 2017 01:59:34 GMT

Good news! The fix is scheduled to be released in our up-coming Jan update!