topic Re: Exporting motion study data in suspension simulation in Fusion Design, Validate & Document Forum

Exporting motion study data in suspension simulation

phillipJSCHJ — Wed, 06 Mar 2024 12:03:29 GMT

Is there a way to export motion data from either tracking a probe, line, or face and its change in orientation through the motion study?

The workaround [edited] way is to move and then sketch, move and then sketch, but this becomes tricky as a suspension component moves dynamically in 3D since a sketch is, well, 2D. A change in toe through travel will change the perspective of whatever features you're tracking for camber, for example

Even if this isn't an automated workflow, some method of better tracking say a camber curve through travel at different steering angles is the goal.

Re: Exporting motion study data in suspension simulation

phillipJSCHJ — Thu, 07 Mar 2024 17:01:55 GMT

Bump, are there tools to get meaningful data out of a motion study?

Re: Exporting motion study data in suspension simulation

CGBenner — Mon, 11 Mar 2024 13:26:48 GMT

@henderh Is this something you might know about?

Re: Exporting motion study data in suspension simulation

phillipJSCHJ — Mon, 11 Mar 2024 19:53:10 GMT

Any help here, or is there no way to get data off of a motion study?

What's the purpose of motion studies without data?

Re: Exporting motion study data in suspension simulation

phillipJSCHJ — Tue, 12 Mar 2024 16:20:37 GMT

Bump? This will force me to cross-train to Solidworks and start moving projects entirely over if we can't get meaningful data from building a moving model in Fusion. There's gotta be some way to plot basic things like camber curves...

Re: Exporting motion study data in suspension simulation

phillipJSCHJ — Tue, 12 Mar 2024 21:14:46 GMT

Bump

Re: Exporting motion study data in suspension simulation

MichaelT_123 — Tue, 12 Mar 2024 23:07:22 GMT

Hi Mr PhillipJSCHJ,

Please send a file (possibly a simplified and must-flat version) stating joints/motion limits/ motion relations/points to trace. …

… and I will try to commit one-off-only-help.

Condition: I will present the results on the Forum as visuals and the relevant data.

Regards

MichaelT

Re: Exporting motion study data in suspension simulation

JDMather — Wed, 13 Mar 2024 18:00:10 GMT

@phillipJSCHJ wrote:

Bump? This will force me to cross-train to Solidworks….

@phillipJSCHJ

No need to leave the Autodesk ecosystem - you can do this in Autodesk Inventor Professional Dynamic Simulation environment with Trace. Works much better than SolidWorks for this too.