topic Re: Multiple joints between two components in Fusion Design, Validate & Document Forum https://forums.autodesk.com/t5/fusion-design-validate-document/multiple-joints-between-two-components/m-p/6685066#M233841 <P>Have you tried using contact sets (see the Assemble menu) to achieve the right results?</P> <P>&nbsp;</P> <P>&nbsp;</P> Sun, 13 Nov 2016 19:01:34 GMT innovatenate 2016-11-13T19:01:34Z Multiple joints between two components https://forums.autodesk.com/t5/fusion-design-validate-document/multiple-joints-between-two-components/m-p/6684791#M233840 <P><SPAN>As the green ring roates counter clockwise it works&nbsp;the blade to turn into the middle at the axis point where it says -30° shown on the second image. The problem I have is that I can't get the cylinder on the slot to follow the path, any other joint creates an error. I would like for when I turn the green component to rotate that the blade rotate/turn at the axis point. This is modeled after a real part so it is possible to work.</SPAN></P><P>&nbsp;</P><P><SPAN><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="7 blades Large size v3 capture.png" style="width: 705px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/292377i8B48C34C60AF58B0/image-size/large?v=v2&amp;px=999" role="button" title="7 blades Large size v3 capture.png" alt="7 blades Large size v3 capture.png" /></span><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="7 blades Large size v3 capture 2.png" style="width: 705px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/292378iDDB204F35C7520C4/image-size/large?v=v2&amp;px=999" role="button" title="7 blades Large size v3 capture 2.png" alt="7 blades Large size v3 capture 2.png" /></span></SPAN></P> Sun, 13 Nov 2016 10:53:29 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/multiple-joints-between-two-components/m-p/6684791#M233840 Anonymous 2016-11-13T10:53:29Z Re: Multiple joints between two components https://forums.autodesk.com/t5/fusion-design-validate-document/multiple-joints-between-two-components/m-p/6685066#M233841 <P>Have you tried using contact sets (see the Assemble menu) to achieve the right results?</P> <P>&nbsp;</P> <P>&nbsp;</P> Sun, 13 Nov 2016 19:01:34 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/multiple-joints-between-two-components/m-p/6685066#M233841 innovatenate 2016-11-13T19:01:34Z