topic Re: Emboss distortion on chamfer in Fusion Design, Validate & Document Forum

Emboss distortion on chamfer

fiveirobotics — Fri, 15 Mar 2024 02:00:29 GMT

Hello, I am a beginner fusion user.

I am trying to emboss a circular, brick like patten on a chamfer. When I try to emboss the pattern it curves more than it should. I've tried to change the angles and positioning to make it fit, but nothing makes it fit the inner circle

I've tried to experiment with simpler objects. I have a chamfer on a cylinder with a rectangle embossed on the chamfer. When I emboss it the rectangle curves instead of staying straight.

Is there any way to fix this. If not are the any alternatives to create the pattern I want.

Re: Emboss distortion on chamfer

Drewpan — Fri, 15 Mar 2024 04:46:57 GMT

Hi,

Have you tried to make a simple one brick representation and then use circular pattern tool set to feature? You can

then do a combine to make it one single body.

Cheers

Andrew

Re: Emboss distortion on chamfer

TheCADWhisperer — Fri, 15 Mar 2024 10:27:27 GMT

@fiveirobotics

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Emboss distortion on chamfer

Warmingup1953 — Sat, 16 Mar 2024 05:07:54 GMT

There's a lot of options with the 5 Images you posted....I assume this is one you are actually after? What is it? and the purpose of the brick like pattern? Share your model?

Re: Emboss distortion on chamfer

fiveirobotics — Sat, 16 Mar 2024 16:31:36 GMT

This fixed the distortion issue. Do you know if there's any way to create variation in the pattern. I would like the bricks to be different sizes.

Re: Emboss distortion on chamfer

fiveirobotics — Sat, 16 Mar 2024 16:33:46 GMT

Here is the file

Re: Emboss distortion on chamfer

fiveirobotics — Sat, 16 Mar 2024 16:36:14 GMT

I attached the file in the reply above. This is what the design is based off of and what I'm trying to get the finished design to look like.

Re: Emboss distortion on chamfer

wersy — Sat, 16 Mar 2024 17:03:56 GMT

The inner ring-shaped grooves could also be made in this way.

It's all very small, is that supposed to be printed MDF?

Re: Emboss distortion on chamfer

fiveirobotics — Sat, 16 Mar 2024 17:14:37 GMT

Thank you, this helps a lot. I don't know what MDF means, but I'm scaling it up when I print it.

Re: Emboss distortion on chamfer

wersy — Sat, 16 Mar 2024 17:58:29 GMT

@fiveirobotics schrieb:
Thank you, this helps a lot. I don't know what MDF means, but I'm scaling it up when I print it.

Sorry!
I meant "FDM" (Fused Deposition Modeling)

Re: Emboss distortion on chamfer

wersy — Sat, 16 Mar 2024 18:19:02 GMT

You can try the emboss this way