topic Raspberry with shield in Fusion Design, Validate & Document Forum

Raspberry with shield

Anonymous — Fri, 23 Dec 2016 22:07:41 GMT

Hello

I designed a shield for my raspberry with more electronics components, basically it's twice the height of the raspberry itself. I'm totally new to Fusion 360 and I would like to build a case for this, knowing the height is not standard. I tried to update this model found on Autodesk Gallery, but I can't find how to do it. Is it at least possible or should I start from scratch ?

https://gallery.autodesk.com/fusion360/projects/raspberry-pi-3-2-or-bplus-case

Any idea ?

Mickael.

Re: Raspberry with shield

innovatenate — Fri, 23 Dec 2016 22:23:46 GMT

Welcome to the Fusion 360 Community!

Does the solution in the below link help? You should be able to upload the F3D file from the gallery.

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-import-or-open-a-file-in-Autodesk-Fusion-360.html

I hope that helps!

Let me know if you have any other questions.

Re: Raspberry with shield

etfrench — Fri, 23 Dec 2016 22:53:00 GMT

It depends on whether the Rasberry is attached to the upper or lower part. This screencast assumes it's attached to the lower part. You'll need to move the split part the correct distance for your shield and possible change the height for the posts.

Re: Raspberry with shield

Anonymous — Sat, 24 Dec 2016 08:52:49 GMT

Waoh many thanks, this video cast has been so helpful ! Thanks for taking the time to help me !