topic Re: Split Face Selection Anomaly in Fusion Design, Validate & Document Forum

Split Face Selection Anomaly

TheCADWhisperer — Sun, 15 Jan 2017 21:08:33 GMT

I ran into an issue selecting split faces related to this thread.

I had to toggle chain select on/off to get individual faces.

Re: Split Face Selection Anomaly

Mike.Grau — Mon, 16 Jan 2017 14:07:37 GMT

Hi @TheCADWhisperer,

Thank you for sharing this with us.

I really would like to reproduce this behavior and share this with our development team.

Could you share a public link with us, you can directly send it to mike.grau@autodesk.com if you would like to.

I look forward hearing from you.

Thanks,

Re: Split Face Selection Anomaly

TheCADWhisperer — Mon, 16 Jan 2017 14:30:05 GMT

Here is the file.

The behavior on first selection is as expected, must turn off Chain Selection, that makes logical sense - but every selection after that must toggle Chain Selection on/off to get expected behavior (you might add a few more split faces to the example before trying).

Re: Split Face Selection Anomaly

Mike.Grau — Thu, 19 Jan 2017 09:37:42 GMT

Hi @TheCADWhisperer,

Thank you for sharing your file.

I have reproduced what you have shown in your screencast and logged this issue with the development team.

With the development team taking over from here they will dig deeper to find the root cause of the "chain selection"

actiavation.

Thanks and best regards,