topic Re: UNDO Ctrl+z NOT WORKING in Fusion Design, Validate & Document Forum

UNDO Ctrl+z NOT WORKING

sharathnaik33 — Sat, 21 Jan 2017 15:43:42 GMT

After the new first update of JAN 2017 I realized that during edit form when something goes wrong the, ctrl+z (to go step back) command doesn't work anymore. Same case during move command. Am I the only one facing it? It's really irritating cause I use that command quite often.

Re: UNDO Ctrl+z NOT WORKING

ahreum.ryu — Sun, 22 Jan 2017 01:50:30 GMT

Hi @sharathnaik33,

sorry about that I tried to reproduce it but I couldn't. this is my step could you take a look at this? and if i missed soemthing could you let me know?

Is there any speific things on your machine?? I've tested it using Mac and win... hum... what is your OS?

I look forward to your reply.

Many thanks.

Re: UNDO Ctrl+z NOT WORKING

sharathnaik33 — Mon, 23 Jan 2017 09:14:45 GMT

Yes, that works. But there's a problem. It works when your model doesn't cover your whole screen. If that's the case then we need to zoom out then undo and again zoom in. Previous undo was fine now it's bit irritating.

Re: UNDO Ctrl+z NOT WORKING

Anonymous — Mon, 23 Jan 2017 11:57:48 GMT

But why did you add this, @ahreum.ryu? Clicking the grid to enable CTRL+Z adds a useless step and doesn't make anything easier.

Re: UNDO Ctrl+z NOT WORKING

sharathnaik33 — Mon, 23 Jan 2017 14:54:30 GMT

Not just the edit form. Even when you use Move command if you do any mistake while moving you can't do undo using Ctrl+z, This is very irritating. I am using win 10.

Re: UNDO Ctrl+z NOT WORKING

ahreum.ryu — Tue, 24 Jan 2017 04:58:45 GMT

Hi @sharathnaik33,

Thank you for replying! I finally got it! I reported it to development team (FUS-30116) and if I receive any response I will get back to you.

but regarding move command,,, I couldn't reproduce it could you show me about that issue through Screencast?

@Anonymous, I'm sorry I don't get it. I just tried to reproduce his issue... did I miss something on the avi??

if I can do anything for you, please let me know

Many thanks~

Re: UNDO Ctrl+z NOT WORKING

Anonymous — Tue, 24 Jan 2017 07:56:12 GMT

Same topic and it's a bug: http://forums.autodesk.com/t5/design-validate-document/undo-ctrl-z-not-working/td-p/6821640

Re: UNDO Ctrl+z NOT WORKING

Anonymous — Thu, 30 Mar 2017 13:30:54 GMT

Hey Everyone,

I had a similar issue with the undo command, using AutoCAD MEP 2016. I am used to just typing "u" in the command line & hitting the space bar multiple times as a back my way thru my drawing using the undo command. for me the undo command would change the first 5 or so moves, the I would have to hit it like 25 times to get to the next undo. after messing around with the undo settings, here is what I did to make undo act like I am used to.

1) type "undo" in command line

2) On the command prompt, select or type "A" for the auto settings.

3) Change to Off

this seems to dumb down to whole command to what I am used to, as opposed to having more control options with the new release.

Re: UNDO Ctrl+z NOT WORKING

Anonymous — Fri, 31 Aug 2018 16:53:03 GMT

I'm working in AutoCAD, but was experiencing this same problem. Pat_Haze_29's solution was perfect.

Re: UNDO Ctrl+z NOT WORKING

Anonymous — Sun, 30 Jun 2019 14:35:04 GMT

go to windows, settings/preferences, preferences -> Undo - you can switch it off/on there