topic Re: How to align group of components in Fusion Design, Validate & Document Forum

How to align group of components

Anonymous — Thu, 02 Feb 2017 08:39:42 GMT

In the image below, I want to be able to grab all of the green components (as a group) and align them to the highlighted component in the center. I previously had all of the green components as it's own assembly but was still unable to use the align tool to accomplish this.

Re: How to align group of components

josef.kucera — Thu, 02 Feb 2017 09:16:19 GMT

Hi @Anonymous

Create a rigid group from all green components then you would be able to move/align whole group

Regards,

Josef

Re: How to align group of components

Anonymous — Thu, 19 Mar 2020 14:18:27 GMT

This does not work for me. Only one part of my assembly moved, the rest including all origins stayed in place. https://autode.sk/2UiFCfD

Re: How to align group of components

erwin — Sat, 02 Oct 2021 16:38:15 GMT

Anybody? I have the same issue here.......

Want to move all components of the printer model to a new origin, but only one body will move at a time......

Re: How to align group of components

g-andresen — Sat, 02 Oct 2021 16:57:59 GMT

Hi,

This is not a problem if you have connected the individual components with joints.
But the screenshot does not give any information about that.

Günther

Re: How to align group of components

erwin — Sat, 02 Oct 2021 17:43:38 GMT

Hi Guenther, no, they are not connected, I received this file from another designer....

Re: How to align group of components

g-andresen — Sat, 02 Oct 2021 17:49:58 GMT

Hi,

I recommend that you look into assemblies.
There are numerous tutorials on this.

günther

Re: How to align group of components

davebYYPCU — Sat, 02 Oct 2021 18:27:27 GMT

Make all components a rigid group. Assembly > Rigid Group.

Then Joint one of the Components in the group to the new document position.

Might help....