topic Adding features to an uploaded SolidWorks File??? in Fusion Design, Validate & Document Forum

Adding features to an uploaded SolidWorks File???

John_Sprainis — Sat, 04 Feb 2017 00:20:10 GMT

I have uploaded a file from SW into Fusion and I used the "Find Features" function. It did not recognize one groove. Also, it appears that no edges are recognized. Is there a way to manually enter these features?

Re: Adding features to an uploaded SolidWorks File???

Mike.Grau — Sat, 04 Feb 2017 14:00:10 GMT

Hi @John_Sprainis

Thank you for your post in the forum.

Could you may share your design via A360 with us and create an unlisted screencast which shows us what you would like to achieve?

If you would like to know how to

Share the design via "Public Link", please review the article Here shows
Download Screencast for your Operating System, please use this article Here
Create a Screencast to share a video of your workflow with the link Link Here

Please, keep us updated.

Thanks,

Re: Adding features to an uploaded SolidWorks File???

TheCADWhisperer — Sat, 04 Feb 2017 14:07:19 GMT

@Anonymous wrote:

Is there a way to manually enter these features?

...or, if you

File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

I will create video of how to manually enter the features in Fusion 360.

(If you can attach the SWx *.sldprt file - I would prefer that format for the demonstration.)