topic Re: Adapting a relief onto a rolling pin in Fusion Design, Validate & Document Forum

Adapting a relief onto a rolling pin

donaldo3 — Sat, 04 Feb 2017 16:18:44 GMT

I am using a 3D scanner to model z-adapted reliefs the fast way. The reliefs are about 5mm high How can I adapt, deform, roll these reliefs up onto a rolling pin which I would like to 3D print? Please get me right, I do not only want to bake sweets which have the outline of a certain object, I want to bake small reliefs. I did a lot of trials but, they are far away from what we would expect 😉 tasty 😉 they are but... - don

Re: Adapting a relief onto a rolling pin

innovatenate — Sun, 05 Feb 2017 21:57:25 GMT

Can you share some screenshots of what you're trying to do?

It sounds like you're looking for a deform tool like a bend or twist, like this:

http://forums.autodesk.com/t5/ideastation-request-a-feature-or/bend-body/idi-p/5291287

There's not currently a feature that does this, but you can add your support by voting up the idea in the Ideastation.

The only other thing I can think is something along these lines using the sketch project to surface tool.

https://www.youtube.com/watch?v=WEdbBTQ0qaw

I hope these help. Please let me know if you have any questions.

Thanks,

Re: Adapting a relief onto a rolling pin

donaldo3 — Tue, 07 Feb 2017 17:19:32 GMT

Yes, oh yes this helps me, thank you very much, your help and advice are
welcome. don