topic Re: BUG in Fusion360 simulation - slice plane in Fusion Design, Validate & Document Forum

BUG in Fusion360 simulation - slice plane

Anonymous — Sat, 18 Feb 2017 15:29:39 GMT

BUG in Fusion360 simulation - slice plane

1. Load model

http://a360.co/2kJJ5QL

2. Go to simulation environment - results

3. Inspect - Create Slice Plane. Pick any surface. Move the slice plane using the arrow handle. click OK.

4. Move the Step slider. All is fine.

5. Edit the Slice Plane. Move the slice plane using the arrow handle.

6. Fusion 360 shows a log window with rapidly scrolling error messages.

7. When closing the window Fusion 360 crashes

David

Re: BUG in Fusion360 simulation - slice plane

John_Holtz — Wed, 22 Feb 2017 18:30:39 GMT

Hi David (@Anonymous)

Thank for the detailed steps. I tried to reproduce the problem with two different models that I had, but they worked okay. I have downloaded your model and will run it get results, so I will try the slice plane when it completes.

Re: BUG in Fusion360 simulation - slice plane

John_Holtz — Thu, 23 Feb 2017 16:33:29 GMT

Hi David,

I was able to reproduce the bug using your model. I will report this problem to the developers.

Thanks for reporting this.