topic Re: Imported bodies to "assemblies" in Fusion Design, Validate & Document Forum

Imported bodies to "assemblies"

SEIZMICdesign — Fri, 17 Mar 2017 21:34:02 GMT

So I have an imported model consisting of a few dozen parts/bodies. I'm wondering what the best practice is for converting these bodies into "assemblies" (I come from the SolidWorks way of thinking). Ultimately, I need to group several components into an "assembly" and there will be a number of assemblies, each of which hinge on each other. I've converted the bodies into components, but now I'm faced with a number of options. I could:

A) create rigid group assemblies

B) create a selection set

C) create a new component

Once I create the proper group/s I will need to create joints between them as I mentioned before.

What is the recommended process for this type of model?

Re: Imported bodies to "assemblies"

TrippyLighting — Fri, 17 Mar 2017 22:36:28 GMT

If you can share the model that'll get you help most quickly.

Re: Imported bodies to "assemblies"

TrippyLighting — Sat, 18 Mar 2017 01:38:51 GMT

This screencast may provide some help.

Re: Imported bodies to "assemblies"

SEIZMICdesign — Sun, 19 Mar 2017 22:56:49 GMT

This helps a lot actually, thank you.