topic Re: corrugate cover in Fusion Design, Validate & Document Forum

corrugate cover

eng.abass5 — Fri, 07 Apr 2017 08:15:57 GMT

Hi ,

below I have file has 2 plates

I need to draw a wall following the corrugations between these 2 plates

can any one show me how here or in the file ?

thanks

Re: corrugate cover

daniel_lyall — Fri, 07 Apr 2017 08:53:13 GMT

It would pay to try and fix your model first.

You just need to do two circles extrude it up then cut and combine

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 09:18:26 GMT

how come !!

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 09:16:05 GMT

is it any thing wrong in my module ?

Re: corrugate cover

daniel_lyall — Fri, 07 Apr 2017 09:29:55 GMT

Everything that is yellow and red right click on it and review the warning.

It looks like it's from stuff you have deleted

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 09:33:55 GMT

yes yes .. because I deleted some parts for size issue

I tried to draw 2 circles then extrude, cut but nothing happened.

can you show me how ?

Re: corrugate cover

daniel_lyall — Fri, 07 Apr 2017 09:44:20 GMT

Sorry I cant everytime I try to do What I think will work fusion crashes hard.

It would pay to fix your model

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 09:58:42 GMT

it is ok,

thank you

Re: corrugate cover

jasonhomrighaus — Fri, 07 Apr 2017 13:58:34 GMT

Where are you trying to create your wall?

Are you trying to make a rim around the perimeter?

Are you trying to attach a wall to the surface?

Are you trying to fill the space between?

Create support ribs in between?

This would help a lot in understanding how to help.

Jason

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 14:14:27 GMT

i need wall with thickness 5mm around the perimeter

but fill the space between the two plates

Re: corrugate cover

jasonhomrighaus — Fri, 07 Apr 2017 14:18:23 GMT

Do you need to fill the entire space between them?

Jason Homrighaus
The Watchman
C: (518)637-6601 E: jasonhomrighaus@aim.com

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 14:20:22 GMT

no I need to go out round the corrugated circle 5mm and build a surface following the corrugation pattern

Re: corrugate cover

jasonhomrighaus — Fri, 07 Apr 2017 16:42:33 GMT

Like this?

or like This?

Re: corrugate cover

eng.abass5 — Fri, 07 Apr 2017 16:44:40 GMT

first one ..

can you explain how come ?

Re: corrugate cover

jasonhomrighaus — Fri, 07 Apr 2017 17:01:51 GMT

So First I used the push pull to extend your corregated plates out another 5mm.

Next I created a new ring using your sketch, that extended above and below the corrugations.

after that i combined one of the corregated bodies with the new ring body and selected to Cut the ring body. Repeat with the second corrugated part.

you will now have 3 bodies where once you had a ring.

Ive attached your model with the 3 bodies still present.

last I created a wider circle in sketch and extruded that to cut off the excess corrugated material. there is a little strangeness at the outside edge.

In the future, you may want to create your corrugation profile sketch somewhat larger than the final design, then you could use it repetedly to cut and parts such as the outer ring.

Re: corrugate cover

eng.abass5 — Sat, 08 Apr 2017 17:38:01 GMT

I am really very very thankful.

i spent a lot of time trying to solve this problem 🙂

thank you again