topic Latest Updates | New Knowledge Network Articles | Fusion 360 in Fusion Design, Validate & Document Forum

topic Latest Updates | New Knowledge Network Articles | Fusion 360 in Fusion Design, Validate & Document Forum https://forums.autodesk.com/t5/fusion-design-validate-document/latest-updates-new-knowledge-network-articles-fusion-360/m-p/7009891#M207376 <P><STRONG>Question: Where can I find a list of the latest Autodesk <SPAN class="lia-search-match-lithium">Knowledge</SPAN> <SPAN class="lia-search-match-lithium">Network</SPAN> support solutions that were created and/or updated for Fusion 360?</STRONG></P> <P> </P> <P> </P> <CENTER><STRONG> Subscribe to receive updates for <SPAN class="lia-search-match-lithium">new</SPAN> Fusion 360 <SPAN class="lia-search-match-lithium">Knowledge</SPAN> <SPAN class="lia-search-match-lithium">Network</SPAN> <SPAN class="lia-search-match-lithium">articles</SPAN>.</STRONG> <BR />For more updated solutions, also check out the <STRONG><A href="http://autode.sk/1Niy43e" target="_blank" rel="nofollow noopener noreferrer">AutodeskHelp Blog</A></STRONG>!</CENTER><CENTER><A href="http://autode.sk/2jP174n" target="_blank">2016 Solutions</A></CENTER> Tue, 11 Apr 2017 17:10:49 GMT matthew.d 2017-04-11T17:10:49Z Latest Updates | New Knowledge Network Articles | Fusion 360 https://forums.autodesk.com/t5/fusion-design-validate-document/latest-updates-new-knowledge-network-articles-fusion-360/m-p/7009891#M207376 <P><STRONG>Question: Where can I find a list of the latest Autodesk <SPAN class="lia-search-match-lithium">Knowledge</SPAN> <SPAN class="lia-search-match-lithium">Network</SPAN> support solutions that were created and/or updated for Fusion 360?</STRONG></P> <P> </P> <P> </P> <CENTER><STRONG> Subscribe to receive updates for <SPAN class="lia-search-match-lithium">new</SPAN> Fusion 360 <SPAN class="lia-search-match-lithium">Knowledge</SPAN> <SPAN class="lia-search-match-lithium">Network</SPAN> <SPAN class="lia-search-match-lithium">articles</SPAN>.</STRONG> <BR />For more updated solutions, also check out the <STRONG><A href="http://autode.sk/1Niy43e" target="_blank" rel="nofollow noopener noreferrer">AutodeskHelp Blog</A></STRONG>!</CENTER><CENTER><A href="http://autode.sk/2jP174n" target="_blank">2016 Solutions</A></CENTER> Tue, 11 Apr 2017 17:10:49 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/latest-updates-new-knowledge-network-articles-fusion-360/m-p/7009891#M207376 matthew.d 2017-04-11T17:10:49Z Re: Latest Updates | New Knowledge Network Articles | Fusion 360 https://forums.autodesk.com/t5/fusion-design-validate-document/latest-updates-new-knowledge-network-articles-fusion-360/m-p/7009894#M207377 <P><FONT size="3"><EM><STRONG>December 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="780" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Request for Takumi V10 post processor for Fusion 360 or HSM product"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Request-for-Takumi-V10-post-processor-for-Fusion-360-or-HSM-product" target="_blank">Request for Takumi V10 post processor for Fusion 360 or HSM product</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Request for Mazak VTC-20B post processor for Fusion 360 or HSM product"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Request-for-Mazak-VTC-20B-post-processor-for-Fusion-360-or-HSM-product" target="_blank">Request for Mazak VTC-20B post processor for Fusion 360 or HSM product</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Some bodies are missing when importing DWG file into Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Some-bodies-are-missing-when-importing-DWG-file-into-Fusion-360" target="_blank">Some bodies are missing when importing DWG file into Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to install and use Slicer for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-install-and-use-Slicer-for-Fusion-360" target="_blank">How to install and use Slicer for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Importing custom symbols in to Fusion 360 drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Importing-custom-symbols-in-to-Fusion-360-drawing" target="_blank">Importing custom symbols in to Fusion 360 drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 crashes when converting BRep to Tspline using curvature length spacing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-crashes-when-converting-BRep-to-Tspline-using-curvature-length-spacing" target="_blank">Fusion 360 crashes when converting BRep to Tspline using curvature length spacing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 app for Android crashes after upgraded to Oreo"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-app-for-Android-crashes-after-upgraded-to-Oreo" target="_blank">Fusion 360 app for Android crashes after upgraded to Oreo</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"2D Chamfer toolpath generates unnecessary retracts on a hole"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/2D-Chamfer-toolpath-generates-unnecessary-retracts-on-a-hole" target="_blank">2D Chamfer toolpath generates unnecessary retracts on a hole</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"3Dconnexion Space Navigator works nothing or only zooming in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/3Dconnexion-Space-Navigator-works-nothing-or-only-zooming-in-Fusion-360" target="_blank">3Dconnexion Space Navigator works nothing or only zooming in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot find dataset files for Fusion 360 Adoption Portal"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-find-dataset-files-for-Fusion-360-Adoption-Portal" target="_blank">Cannot find dataset files for Fusion 360 Adoption Portal</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion Sync coverts PCB profile to jagged curves as pulled to EAGLE"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-Sync-coverts-PCB-profile-to-jagged-curves-as-pulled-to-EAGLE" target="_blank">Fusion Sync coverts PCB profile to jagged curves as pulled to EAGLE</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Slow Behavior with Space Navigator"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Slow-Behavior-with-Space-Navigator" target="_blank">Slow Behavior with Space Navigator</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Adding a flag note symbol to Fusion 360 drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Adding-a-flag-note-symbol-to-Fusion-360-drawing" target="_blank">Adding a flag note symbol to Fusion 360 drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 fails to create chamfer between near tangent faces"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-fails-to-create-chamfer-between-near-tangent-faces" target="_blank">Fusion 360 fails to create chamfer between near tangent faces</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 fails to install within Sandboxie"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-fails-to-install-within-Sandboxie" target="_blank">Fusion 360 fails to install within Sandboxie</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 fails to orbit around selected point"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-fails-to-orbit-around-selected-point" target="_blank">Fusion 360 fails to orbit around selected point</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 fails to select text using window selection in Sketch mode"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-fails-to-select-text-using-window-selection-in-Sketch-mode" target="_blank">Fusion 360 fails to select text using window selection in Sketch mode</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Help does not activate Chrome browser"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Help-does-not-activate-Chrome-browser" target="_blank">Fusion 360 Help does not activate Chrome browser</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 prompts user to re-login whenever it’s opened and a “sufficient data not found to switch to Offline Mode” error message sometimes appears"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-prompts-user-to-re-login-whenever-it-s-opened-and-a-sufficient-data-not-found-to-switch-to-Offline-Mode-error-message-sometimes-appears" target="_blank">Fusion 360 prompts user to re-login whenever it’s opened and a “sufficient data not found to switch to Offline Mode” error message sometimes appears</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sketch constraint preview in Fusion 360 indicates “fully-constrained” when it is not"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sketch-constraint-preview-in-Fusion-360-indicates-fully-constrained-when-it-is-not" target="_blank">Sketch constraint preview in Fusion 360 indicates “fully-constrained” when it is not</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to reinstall Fusion 360 after performing a system restore"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-reinstall-Fusion-360-after-performing-a-system-restore" target="_blank">Unable to reinstall Fusion 360 after performing a system restore</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Why is open passes linked with both ways zig-zag warning appearing in Fusion 360 CAM"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Why-is-open-passes-linked-with-both-ways-zig-zag-warning-appearing-in-Fusion-360-CAM" target="_blank">Why is open passes linked with both ways zig-zag warning appearing in Fusion 360 CAM</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 file is blank when being viewed in the Fusion 360 Mobile App"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-file-is-blank-when-being-viewed-in-the-Fusion-360-Mobile-App" target="_blank">Fusion 360 file is blank when being viewed in the Fusion 360 Mobile App</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>November 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="696" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"2D Drawings Roadmap for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/2D-Drawings-Roadmap-for-Fusion-360" target="_blank">2D Drawings Roadmap for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Browser of Fusion 360 is empty"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Browser-of-Fusion-360-is-empty" target="_blank">Browser of Fusion 360 is empty</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot select sketch point to scale sketch entities around in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-select-sketch-point-to-scale-sketch-entities-around-in-Fusion-360" target="_blank">Cannot select sketch point to scale sketch entities around in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Do I qualify for free use of Fusion 360?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Do-I-qualify-for-free-use-of-Fusion-360" target="_blank">Do I qualify for free use of Fusion 360?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Error: Internal Error: Regularization failed in Fusion simulation"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Internal-Error-Regularization-failed-in-Fusion-simulation" target="_blank">Error: Internal Error: Regularization failed in Fusion simulation</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"FTNF-604 error when view files on the A360 or Fusion 360 mobile app"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/FTNF-604-error-when-viewing-files-on-the-A360-or-Fusion-360-mobile-app" target="_blank">FTNF-604 error when view files on the A360 or Fusion 360 mobile app</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - Timeline error: The model is using cached geometry to solve. Please reselect reference geometry for failed features in the timeline."}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Timeline-error-The-model-is-using-cached-geometry-to-solve-Please-reselect-reference-geometry-for-failed-features-in-the-timeline" target="_blank">Fusion 360 - Timeline error: The model is using cached geometry to solve. Please reselect reference geometry for failed features in the timeline.</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 cannot open Brackets when posting G code"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-cannot-open-Brackets-when-posting-G-code" target="_blank">Fusion 360 cannot open Brackets when posting G code</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 installation error “urlopen error EOF occurred in violation of protocol (_ssl.c:720)”"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-installation-error-urlopen-error-EOF-occurred-in-violation-of-protocol-ssl-c-720" target="_blank">Fusion 360 installation error “urlopen error EOF occurred in violation of protocol (_ssl.c:720)”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 learning videos not working"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-learning-videos-not-working" target="_blank">Fusion 360 learning videos not working</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 outputs multiple files when post processing CAM tool paths"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-outputs-multiple-files-when-post-processing-CAM-tool-paths" target="_blank">Fusion 360 outputs multiple files when post processing CAM tool paths</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 separately available for Students and Educational Institutions"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-separately-available-for-Students-and-Educational-Institutions" target="_blank">Fusion 360 separately available for Students and Educational Institutions</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360: Can we assign rigid body behaviour to components in Fusion 360 simulation."}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Can-we-assign-rigid-body-behaviour-to-components-in-Fusion-360-simulation" target="_blank">Fusion 360: Can we assign rigid body behaviour to components in Fusion 360 simulation.</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360: Message “Error: Mesh failed: Face failure” in Fusion 360 Simulation During the Mesh Process"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-Simulation-Mesh-failed-Face-failure" target="_blank">Fusion 360: Message “Error: Mesh failed: Face failure” in Fusion 360 Simulation During the Mesh Process</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to create a twist in an extrude or sweep in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-twist-in-an-extrude-or-sweep-in-Fusion-360" target="_blank">How to create a twist in an extrude or sweep in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to sync the environment setting in Fusion 360 with the setting in the web viewer"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-sync-the-environment-setting-in-Fusion-360-with-the-setting-in-the-web-viewer" target="_blank">How to sync the environment setting in Fusion 360 with the setting in the web viewer</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to update a Lab Installation of Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-update-a-Lab-Installation-of-Fusion-360" target="_blank">How to update a Lab Installation of Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"HSM crashes Inventor when creating CAM setup from DWG"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/HSM-crashes-Inventor-when-creating-CAM-setup-from-DWG" target="_blank">HSM crashes Inventor when creating CAM setup from DWG</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Installation Error with Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Installation-Error-with-Fusion-360" target="_blank">Installation Error with Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Inventor assembly is stuck processing when uploaded to Fusion Team"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inventor-assembly-is-stuck-processing-when-uploaded-to-Fusion-Team" target="_blank">Inventor assembly is stuck processing when uploaded to Fusion Team</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Need a post processor for Doosan 2600Y for Fusion 360 or HSM product"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Need-a-post-processor-for-Doosan-2600Y-for-Fusion-360-or-HSM-product" target="_blank">Need a post processor for Doosan 2600Y for Fusion 360 or HSM product</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Parts list headings are at the bottom instead of the top of the table in a Fusion 360 drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Parts-list-headings-are-at-the-bottom-instead-of-the-top-of-the-table-in-a-Fusion-360-drawing" target="_blank">Parts list headings are at the bottom instead of the top of the table in a Fusion 360 drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Post processor output folder default not maintained Fusion 360 CAM"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Post-processor-output-folder-default-not-maintained-Fusion-360-CAM" target="_blank">Post processor output folder default not maintained Fusion 360 CAM</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Project sketch dialog box has inconsistent behavior with the other dialog boxes in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Project-sketch-dialog-box-has-inconsistent-behavior-with-the-other-dialog-boxes-in-Fusion-360" target="_blank">Project sketch dialog box has inconsistent behavior with the other dialog boxes in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Request for LinuxCNC plasma post processor for Fusion 360 or HSM"}">Request for LinuxCNC plasma post processor for Fusion 360 or HSM</TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Stuck in 30 day Trial Mode in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Stuck-in-30-day-Trial-Mode-in-Fusion-360" target="_blank">Stuck in 30 day Trial Mode in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The height of a Sheet Metal flange does not match the selected height datum in Fusion 360"}">The height of a Sheet Metal flange does not match the selected height datum in Fusion 360</TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Turning profile does not cut to center of face when roughing passes disabled Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Turning-profile-does-not-cut-to-center-of-face-when-roughing-passes-disabled-Fusion-360" target="_blank">Turning profile does not cut to center of face when roughing passes disabled Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to export Fusion 360 designs from expired trial account"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-export-Fusion-360-designs-from-expired-trial-account" target="_blank">Unable to export Fusion 360 designs from expired trial account</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"View cube does not show up in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/View-cube-does-not-show-up-in-Fusion-360" target="_blank">View cube does not show up in Fusion 360</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>October 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="712" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"A DXF file uploaded or inserted into Fusion 360 is empty"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/A-DXF-file-uploaded-or-inserted-into-Fusion-360-is-empty" target="_blank">A DXF file uploaded or inserted into Fusion 360 is empty</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Black workspace in Fusion 360 with ESET NOD32 anti-virus software"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Black-workspace-in-Fusion-360-with-ESET-NOD32-anti-virus-software" target="_blank">Black workspace in Fusion 360 with ESET NOD32 anti-virus software</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can I use Fusion 360 without logging in?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-I-use-Fusion-360-without-logging-in" target="_blank">Can I use Fusion 360 without logging in?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot create 3D model in Fusion 360 mobile application"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-create-3D-model-in-Fusion-360-mobile-application" target="_blank">Cannot create 3D model in Fusion 360 mobile application</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Easy way to change the sketch dimension in timeline"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Easy-way-to-change-the-sketch-dimension-in-timeline" target="_blank">Easy way to change the sketch dimension in timeline</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Form mill tool previews too large when in IN units Fusion 360 CAM"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Form-mill-tool-previews-too-large-when-in-IN-units-Fusion-360-CAM" target="_blank">Form mill tool previews too large when in IN units Fusion 360 CAM</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - Failed to get client ip address [Errno 8] nodename nor servname provided, or not known"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Failed-to-get-client-ip-address-Errno-8-nodename-nor-servname-provided-or-not-known" target="_blank">Fusion 360 - Failed to get client ip address [Errno 8] nodename nor servname provided, or not known</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - How to turn off unit display in Drawings"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-How-to-turn-off-unit-display-in-Drawings" target="_blank">Fusion 360 - How to turn off unit display in Drawings</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 crashes when saving"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-crashes-when-saving" target="_blank">Fusion 360 crashes when saving</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Errors Traceback and MakeTime AddIn prevent application from opening"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Errors-Traceback-and-MakeTime-AddIn-prevent-application-from-opening" target="_blank">Fusion 360 Errors Traceback and MakeTime AddIn prevent application from opening</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 keeps uninstalling after closing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-keeps-uninstalling-after-closing" target="_blank">Fusion 360 keeps uninstalling after closing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Tangent joint Error : selected joint type will result in conflict"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Tangent-joint-Error-selected-joint-type-will-result-in-conflict" target="_blank">Fusion 360 Tangent joint Error : selected joint type will result in conflict</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to bring the leading zero of a dimension back in the Fusion 360 drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-bring-the-leading-zero-of-a-dimension-back-in-the-Fusion-360-drawing" target="_blank">How to bring the leading zero of a dimension back in the Fusion 360 drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change Mazak 5-axis post processor for indexing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-Mazak-5-axis-post-processor-for-indexing" target="_blank">How to change Mazak 5-axis post processor for indexing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to dimension an arc length in a Fusion 360 sketch"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-dimension-an-arc-length-in-a-Fusion-360-sketch" target="_blank">How to dimension an arc length in a Fusion 360 sketch</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to edit flange extents in the sheet metal workspace of Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-edit-flange-extents-in-the-sheet-metal-workspace-of-Fusion-360" target="_blank">How to edit flange extents in the sheet metal workspace of Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to extract a sheet metal component from a generic CAD format in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-extract-a-sheet-metal-component-from-a-generic-CAD-format-in-Fusion-360" target="_blank">How to extract a sheet metal component from a generic CAD format in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Japanese characters do not display properly when importing Parasolid file"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Japanese-characters-do-not-display-properly-when-importing-Parasolid-file" target="_blank">Japanese characters do not display properly when importing Parasolid file</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Random lines appear in Fusion 360 drawings environment (Graphics-related)"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Random-lines-appear-in-Fusion-360-drawings-environment-Graphics-related" target="_blank">Random lines appear in Fusion 360 drawings environment (Graphics-related)</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The download link from an exported OBJ in A360 is broken"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-download-link-from-an-exported-OBJ-in-A360-is-broken" target="_blank">The download link from an exported OBJ in A360 is broken</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Training/Learning resources for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Training-Learning-resources-for-Fusion-360" target="_blank">Training/Learning resources for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Useable file formats to import and export data between Rhino and Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Useable-file-formats-to-import-and-export-data-between-Rhino-and-Fusion-360" target="_blank">Useable file formats to import and export data between Rhino and Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"What are the terms of my Fusion 360 education license?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/What-are-the-terms-of-my-Fusion-360-education-license" target="_blank">What are the terms of my Fusion 360 education license?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"When sketching, I cannot select a newly created line"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/When-sketching-I-cannot-select-a-newly-created-line" target="_blank">When sketching, I cannot select a newly created line</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Why does the i help button go away when editing a feature in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Why-does-the-i-help-button-go-away-when-editing-a-feature-in-Fusion-360" target="_blank">Why does the i help button go away when editing a feature in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"You do not appear to be logged into the Fusion 360 Forums even though you are logged into the Autodesk forums"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/You-do-not-appear-to-be-logged-into-the-Fusion-360-Forums-even-though-you-are-logged-into-the-Autodesk-forums" target="_blank">You do not appear to be logged into the Fusion 360 Forums even though you are logged into the Autodesk forums</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="712" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - The program can’t start because acge223.dll is missing from your computer"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-The-program-can-t-start-because-acge223-dll-is-missing-from-your-computer" target="_blank">Fusion 360 - The program can’t start because acge223.dll is missing from your computer</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Service Outage - Unable to login OR open and save data"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Service-Outage-9-5-17-Unable-to-login-OR-open-and-save-data" target="_blank">Fusion 360 Service Outage - Unable to login OR open and save data</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360: Don’t have sheet metal"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Don-t-have-sheet-metal" target="_blank">Fusion 360: Don’t have sheet metal</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360: I have an educational license but my download says it’s a 30 day free trial"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-I-have-an-educational-license-but-my-download-says-it-s-a-30-day-free-trial" target="_blank">Fusion 360: I have an educational license but my download says it’s a 30 day free trial</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360: Is there an option in “Multiple View” for just two viewports?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Is-there-an-option-in-Multiple-View-for-just-two-viewports" target="_blank">Fusion 360: Is there an option in “Multiple View” for just two viewports?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to see which components a joint is applied to in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-see-which-components-a-joint-is-applied-to-in-Fusion-360" target="_blank">How to see which components a joint is applied to in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to see which joints are associated with a particular component in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-see-which-joints-are-associated-with-a-particular-component" target="_blank">How to see which joints are associated with a particular component in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Is Tool Orientation supported in Fusion 360 Standard?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-Tool-Orientation-supported-in-Fusion-360-Standard" target="_blank">Is Tool Orientation supported in Fusion 360 Standard?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The selected DXF file does not contain units information"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-selected-DXF-file-does-not-contain-units-information" target="_blank">The selected DXF file does not contain units information</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"After drawing a rectangle in fusion the dimensions do not stay or are displayed"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/After-drawing-a-rectangle-in-fusion-the-dimensions-do-not-stay-or-are-displayed" target="_blank">After drawing a rectangle in fusion the dimensions do not stay or are displayed</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Arc moves need to be forced for all moves in a g-code program from Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Arc-moves-need-to-be-forced-for-all-moves-in-a-g-code-program-from-Fusion-360" target="_blank">Arc moves need to be forced for all moves in a g-code program from Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can’t install Fusion 360:[WinError 10060] A connection attempt failed because the connected party did not properly respond"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-t-install-Fusion-360-WinError-10060-A-connection-attempt-failed-because-the-connected-party-did-not-properly-respond" target="_blank">Can’t install Fusion 360:[WinError 10060] A connection attempt failed because the connected party did not properly respond</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Scale of STL file from Fusion 360 is incorrect when opening in 3rd party program"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Scale-of-STL-file-from-Fusion-360-is-incorrect-when-opening-in-3rd-party-program" target="_blank">Scale of STL file from Fusion 360 is incorrect when opening in 3rd party program</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"“The program cant start because ASMBASE223A.dll is missing from your computer. Try reinstalling to fix this problem” error when launching Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-program-cant-start-because-ASMBASE223A-dll-is-missing-from-your-computer-Try-reinstalling-to-fix-this-problem-error-when-launching-Fusion-360" target="_blank">“The program cant start because ASMBASE223A.dll is missing from your computer. Try reinstalling to fix this problem” error when launching Fusion 360</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>September 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="712" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"“Autodesk Fusion 360 Cannot Be Opened Because of a Problem” error message on Mac OS"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Autodesk-Fusion-360-Cannot-Be-Opened-Because-of-a-Problem-error-message-on-Mac-OS" target="_blank">“Autodesk Fusion 360 Cannot Be Opened Because of a Problem” error message on Mac OS</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"DXF files exported from Fusion 360 cannot be opened in the FlowXpert CAM software for waterjet cutting"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/DXF-files-exported-from-Fusion-360-cannot-be-opened-in-the-FlowXpert-CAM-software-for-waterjet-cutting" target="_blank">DXF files exported from Fusion 360 cannot be opened in the FlowXpert CAM software for waterjet cutting</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Empty body group folders cannot be selected in the Move to Group dialogue of Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Empty-body-group-folders-cannot-be-selected-in-the-Move-to-Group-dialogue-of-Fusion-360" target="_blank">Empty body group folders cannot be selected in the Move to Group dialogue of Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Error Messages in lower corner of screen disappear before they can be read - Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Messages-in-lower-corner-of-screen-disappear-before-they-can-be-read" target="_blank">Error Messages in lower corner of screen disappear before they can be read - Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360: Which contact types are applicable to linear or nonlinear analysis within Fusion 360 simulation?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Which-contact-types-are-applicable-to-linear-or-nonlinear-analysis-within-Fusion-360-simulation" target="_blank">Fusion 360: Which contact types are applicable to linear or nonlinear analysis within Fusion 360 simulation?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change the High Feedrate Mode in Fusion 360 CAM / HSM"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-High-Feedrate-Mode-in-Fusion-360-CAM-HSM" target="_blank">How to change the High Feedrate Mode in Fusion 360 CAM / HSM</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Is there an Offline Installer for Fusion 360 available?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-there-an-Offline-Installer-for-Fusion-360-available" target="_blank">Is there an Offline Installer for Fusion 360 available?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"NC Editor does not open - Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/NC-Editor-does-not-open-Fusion-360" target="_blank">NC Editor does not open - Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"ReCap Pro showing as “Recap” only once downloaded"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Recap-Pro-showing-as-Recap-only-when-installed" target="_blank">ReCap Pro showing as “Recap” only once downloaded</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Resolving Timeline Warning or Errors in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Resolving-Timeline-Warning-or-Errors-in-Fusion-360" target="_blank">Resolving Timeline Warning or Errors in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Roughing passes use the finishing feed rate in a 2D Contour operation in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Roughing-passes-use-the-finishing-feed-rate-in-a-2D-Contour-operation-in-Fusion-360" target="_blank">Roughing passes use the finishing feed rate in a 2D Contour operation in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sign in Failure: There was an error while logging into Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/fusion-360-sign-in-problem" target="_blank">Sign in Failure: There was an error while logging into Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Trumpf l2503e how to edit or create a post processor"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Trumpf-l2503e-how-to-edit-or-create-a-post-processor" target="_blank">Trumpf l2503e how to edit or create a post processor</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Uploading Files Generate Non-Preferrenced Units in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Uploading-Files-Generate-Non-Preferrenced-Units-in-Fusion-360" target="_blank">Uploading Files Generate Non-Preferrenced Units in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"“Error returned from Breps_Create” when trying to mesh a model for simulation in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-returned-from-Breps-Create" target="_blank">“Error returned from Breps_Create” when trying to mesh a model for simulation in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Does lattice optimization exist within Fusion 360?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Does-lattice-optimization-exist-within-Fusion-360" target="_blank">Does lattice optimization exist within Fusion 360?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - How to merge existing drawings"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-How-to-merge-existing-drawings" target="_blank">Fusion 360 - How to merge existing drawings</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - Post processor does not appear in cloud library, despite cloud libraries being turned on"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Post-processor-does-not-appear-in-cloud-library-despite-cloud-libraries-being-turned-on" target="_blank">Fusion 360 - Post processor does not appear in cloud library, despite cloud libraries being turned on</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - Timeline error: The sketch plane is lost. Cache is used. Please redefine the sketch to select other plane!"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Timeline-error-The-sketch-plane-is-lost-Cache-is-used-Please-redefine-the-sketch-to-select-other-plane" target="_blank">Fusion 360 - Timeline error: The sketch plane is lost. Cache is used. Please redefine the sketch to select other plane!</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 installation error: PermissionError: [Errno 13] Permission denied"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-installation-error-PermissionError-Errno-13-Permission-denied" target="_blank">Fusion 360 installation error: PermissionError: [Errno 13] Permission denied</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 is not opening and a urlerror is found in the webdeploy log"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-is-not-opening-and-a-urlerror-is-found-in-the-webdeploy-log" target="_blank">Fusion 360 is not opening and a urlerror is found in the webdeploy log</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion360.exe Bad Image. libcurl.dll is either not designed to run on Windows or contains an error"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion360-exe-Bad-Image-libcurl-dll-is-either-not-designed-to-run-on-Windows-or-contains-an-error" target="_blank">Fusion360.exe Bad Image. libcurl.dll is either not designed to run on Windows or contains an error</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to export an STL file from Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-export-an-STL-file-from-Fusion-360" target="_blank">How to export an STL file from Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to Import an Image as an Attached Canvas"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Import-an-Image-as-an-Attached-Canvas" target="_blank">How to Import an Image as an Attached Canvas</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to sketch on a 2D Drawing in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-sketch-on-a-2D-Drawing-in-Fusion-360" target="_blank">How to sketch on a 2D Drawing in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"INVALID LICENSE FOR ANALYSIS, TRANSLATOR, OR FEATURE TYPE error messages in Fusion 360 Simulation"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/INVALID-LICENSE-FOR-ANALYSIS-TRANSLATOR-OR-FEATURE-TYPE-error-messages-in-Fusion-360-Simulation" target="_blank">INVALID LICENSE FOR ANALYSIS, TRANSLATOR, OR FEATURE TYPE error messages in Fusion 360 Simulation</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Is there a way to improve performance of the compute all command in Autodesk Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-there-a-way-to-improve-performance-of-the-compute-all-command-in-Autodesk-Fusion-360" target="_blank">Is there a way to improve performance of the compute all command in Autodesk Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Resolving “Error: Turning profile is split into two or more closed parts…” in Fusion 360 CAM Workspace"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Resolving-Error-Turning-profile-is-split-into" target="_blank">Resolving “Error: Turning profile is split into two or more closed parts…” in Fusion 360 CAM Workspace</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The Data Panel, File, Save, and Undo/Redo menu is missing from Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Data-Panel-File-Save-and-Undo-Redo-menu-is-missing-from-Fusion-360" target="_blank">The Data Panel, File, Save, and Undo/Redo menu is missing from Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to remove Fusion 360 from Control Panel"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-remove-Fusion-360-from-Control-Panel" target="_blank">Unable to remove Fusion 360 from Control Panel</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to successfully run local solve analysis within Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-successfully-run-local-solve-analysis-within-Fusion-360" target="_blank">Unable to successfully run local solve analysis within Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to update Fusion 360, database disk image is malformed"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-update-Fusion-360-database-disk-image-is-malformed" target="_blank">Unable to update Fusion 360, database disk image is malformed</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Where to get support for a Fusion 360 API or Script"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-to-get-support-for-a-Fusion-360-API-or-Script" target="_blank">Where to get support for a Fusion 360 API or Script</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Error: [WinError 5] Access is denied when installing fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-WinError-5-Access-is-denied-when-installing-fusion-360" target="_blank">Error: [WinError 5] Access is denied when installing fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Installing Fusion 360 on Mac OSX you get the error [Errno 2] No such file or directory: ‘open’"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Installing-Fusion-360-on-Mac-OSX-you-get-the-error-Errno-2-No-such-file-or-directory-open" target="_blank">Installing Fusion 360 on Mac OSX you get the error [Errno 2] No such file or directory: ‘open’</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Problems Installing Fusion 360 using Microsoft SCCM"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Problems-Installing-Fusion-360-using-Microsoft-SCCM" target="_blank">Problems Installing Fusion 360 using Microsoft SCCM</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to find a design"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-find-a-design" target="_blank">Unable to find a design</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to hide the Menu bar"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-hide-the-Menu-bar" target="_blank">Unable to hide the Menu bar</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to implement a user parameter as the input for a sheet metal rule in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-implement-a-user-parameter-as-the-input-for-a-sheet-metal-rule-in-Fusion-360" target="_blank">Unable to implement a user parameter as the input for a sheet metal rule in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"What are general best practices for using model pattern in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/What-are-general-best-practices-for-using-model-pattern-in-Fusion-360" target="_blank">What are general best practices for using model pattern in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to create Flexible Joints in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-Flexible-Joints-in-Fusion-360" target="_blank">How to create Flexible Joints in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Flipping the direction of sketch elements in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Flipping-the-direction-of-sketch-elements-in-Fusion-360" target="_blank">Flipping the direction of sketch elements in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 is crashing during sketching"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-is-crashing-during-sketching" target="_blank">Fusion 360 is crashing during sketching</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 -Sign In Failure : There was an error while logging in to Fusion 360."}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Sign-In-Failure-There-was-an-error-while-logging-in-to-Fusion-360" target="_blank">Fusion 360 -Sign In Failure : There was an error while logging in to Fusion 360.</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Does Fusion 360 have a “Smart Scale” command like 123D Design?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Does-Fusion-360-have-a-Smart-Scale-command-like-123D-Design" target="_blank">Does Fusion 360 have a “Smart Scale” command like 123D Design?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"After uninstalling an Autodesk program from your Mac you want to locate and remove any residual files"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/After-uninstalling-an-Autodesk-program-from-your-Mac-you-want-to-locate-and-remove-any-residual-files" target="_blank">After uninstalling an Autodesk program from your Mac you want to locate and remove any residual files</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":".IAM files cannot be viewed in the Fusion 360 Mobile App"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/IAM-files-cannot-be-viewed-in-the-Fusion-360-Mobile-App" target="_blank">.IAM files cannot be viewed in the Fusion 360 Mobile App</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="712" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Tool image is incorrect on CAM Setup Sheets created with Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-image-is-incorrect-on-CAM-Setup-Sheets-created-with-Fusion-360" target="_blank">Tool image is incorrect on CAM Setup Sheets created with Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Will I be charged once my Fusion 360 trial expires?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Will-I-be-charged-once-my-Fusion-360-trial-expires" target="_blank">Will I be charged once my Fusion 360 trial expires?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Why does my project folder have a red circle next to it in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Why-does-my-project-folder-have-a-red-circle-next-to-it-in-Fusion-360" target="_blank">Why does my project folder have a red circle next to it in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Probe with Z surface does not allow selection point use"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Probe-with-Z-surface-does-not-allow-selection-point-use" target="_blank">Probe with Z surface does not allow selection point use</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Quantity field does not appear in a sketch circular pattern command in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Quantity-field-does-not-appear-in-a-sketch-circular-pattern-command-in-Fusion-360" target="_blank">Quantity field does not appear in a sketch circular pattern command in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Rapid moves are gouging stock in a Turning Profile operation in Fusion 360 CAM"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Rapid-moves-are-gouging-stock-in-a-Turning-Profile-operation-in-Fusion-360-CAM" target="_blank">Rapid moves are gouging stock in a Turning Profile operation in Fusion 360 CAM</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Reinstallation or update issues [Winerror 5]"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Reinstallation-or-update-issues-Winerror-5" target="_blank">Reinstallation or update issues [Winerror 5]</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The software renderer is being used; it could be due to that the graphics card is not powerful enough or its driver is not installed"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-software-renderer-is-being-used-it-could-be-due-to-that-the-graphics-card-is-not-powerful-enough-or-its-driver-is-not-installed" target="_blank">The software renderer is being used; it could be due to that the graphics card is not powerful enough or its driver is not installed</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to move objects in a sketch."}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-move-objects-in-a-sketch" target="_blank">Unable to move objects in a sketch.</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to move or delete files in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-move-or-delete-files-in-Fusion-360" target="_blank">Unable to move or delete files in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to see thumbnail previews of a model in the Fusion 360 Mobile App"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-see-thumbnail-previews-of-a-model-in-the-Fusion-360-Mobile-App" target="_blank">Unable to see thumbnail previews of a model in the Fusion 360 Mobile App</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Generic Hurco post processor is not working"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Generic-Hurco-post-processor-is-not-working" target="_blank">Generic Hurco post processor is not working</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How much do the Fusion 360 webinars on demand cost?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-much-do-the-Fusion-360-webinars-on-demand-cost" target="_blank">How much do the Fusion 360 webinars on demand cost?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to turn off the origin display in Animation workspace"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-turn-off-the-origin-display-in-Animation-workspace" target="_blank">How to turn off the origin display in Animation workspace</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Chamfer doesn’t allow edits in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Chamfer-doesn-t-allow-edits-in-Fusion-360" target="_blank">Chamfer doesn’t allow edits in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"File Bloat in Fusion 360 Installation Log Files"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/File-Bloat-in-Fusion-360-Installation-Log-Files" target="_blank">File Bloat in Fusion 360 Installation Log Files</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - can’t open files and “registry not found” error is in installation log"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-can-t-open-files-and-registry-not-found-error-is-in-installation-log" target="_blank">Fusion 360 - can’t open files and “registry not found” error is in installation log</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - view doesn’t turn to look at newly created sketch and “stop sketch” button is missing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-view-doesn-t-turn-to-look-at-newly-created-sketch-and-stop-sketch-button-is-missing" target="_blank">Fusion 360 - view doesn’t turn to look at newly created sketch and “stop sketch” button is missing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 crashes with the warning “Sufficient data not found to switch to Offline mode. Application will go online now.”"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/UP-35347-Fusion-360-crashes-with-the-warning-Sufficient-data-not-found-to-switch-to-Offline-mode-Application-will-go-online-now" target="_blank">Fusion 360 crashes with the warning “Sufficient data not found to switch to Offline mode. Application will go online now.”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Drawing - when placing views in Drawing, shading of model is offset"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Drawing-when-placing-views-in-Drawing-shading-of-model-is-offset" target="_blank">Fusion 360 Drawing - when placing views in Drawing, shading of model is offset</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can’t find the Sheet Metal Menu on the specific design"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-t-find-the-Sheet-Metal-Menu-on-the-specific-design" target="_blank">Can’t find the Sheet Metal Menu on the specific design</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Custom font is not able to be used in Fusion 360 on Windows"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Custom-font-is-not-able-to-be-used-in-Fusion-360-on-Windows" target="_blank">Custom font is not able to be used in Fusion 360 on Windows</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"DXF file does not upload (Fusion 360)"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/DXF-file-does-not-upload-Fusion-360" target="_blank">DXF file does not upload (Fusion 360)</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can Fusion 360 run on a Chromebook?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-Fusion-360-run-on-a-Chromebook" target="_blank">Can Fusion 360 run on a Chromebook?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"A “DXF file does not contain units information” error message occurs when importing a DXF file to Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/A-DXF-file-does-not-contain-units-information-error-message-occurs-when-importing-a-DXF-file-to-Fusion-360" target="_blank">A “DXF file does not contain units information” error message occurs when importing a DXF file to Fusion 360</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P> </P> <P><FONT size="3"><EM><STRONG>August 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to convert a mesh to a BRep in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Convert-a-Mesh-to-a-BRep-in-Fusion-360" target="_blank">How to convert a mesh to a BRep in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to know if Fusion 360 services are down"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-know-if-Fusion-360-services-are-down" target="_blank">How to know if Fusion 360 services are down</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to make flat patterns for rolled sheet metal designs"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-make-flat-patterns-for-rolled-sheet-metal-designs" target="_blank">How to make flat patterns for rolled sheet metal designs</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to setup a thermal stress shrink fit simulation in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-setup-a-thermal-stress-shrink-fit-simulation-in-Fusion-360" target="_blank">How to setup a thermal stress shrink fit simulation in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to convert an assembly to a multi-body component in Fusion 360 to retain individual body selection in Maya"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-convert-an-assembly-to-a-multi-body-component-in-Fusion-360-to-retain-individual-body-selection-in-Maya" target="_blank">How to convert an assembly to a multi-body component in Fusion 360 to retain individual body selection in Maya</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to move or rotate grouped bodies in Fusion 360 after initial import?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-move-or-rotate-grouped-bodies-in-Fusion-360-after-initial-import" target="_blank">How to move or rotate grouped bodies in Fusion 360 after initial import?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Launching Fusion 360 generates “Unable to connect to internet” error message"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Launching-Fusion-360-generates-Unable-to-connect-to-internet-error-message" target="_blank">Launching Fusion 360 generates “Unable to connect to internet” error message</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to open Fusion 360 without internet connection"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-open-Fusion-360-without-internet-connection" target="_blank">Unable to open Fusion 360 without internet connection</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"VPAT statement for Autodesk Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/VPAT-statement-for-Autodesk-Fusion-360" target="_blank">VPAT statement for Autodesk Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Identifying or Interrogating sketch geometry in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Identifying-or-Interrogating-sketch-geometry-in-Fusion-360" target="_blank">Identifying or Interrogating sketch geometry in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to uninstall Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-uninstall-Fusion-360" target="_blank">Unable to uninstall Fusion 360</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Projects missing in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Projects-missing-in-Fusion-360" target="_blank">Projects missing in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Tool Lengths are not included on CAM setups sheets created with Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-Lengths-are-not-included-on-CAM-setups-sheets-created-with-Fusion-360" target="_blank">Tool Lengths are not included on CAM setups sheets created with Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unexpected behavior when moving a sketched spline point off of the sketch plane in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unexpected-behavior-when-moving-a-sketched-spline-point-off-of-the-sketch-plane-in-Fusion-360" target="_blank">Unexpected behavior when moving a sketched spline point off of the sketch plane in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Autodesk Fusion 360 on Linux"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-Is-Linux-going-to-be-supported" target="_blank">Autodesk Fusion 360 on Linux</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot create a centerline between two concentric arcs in a Fusion 360 Drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-create-a-centerline-between-two-concentric-arcs-in-a-Fusion-360-Drawing" target="_blank">Cannot create a centerline between two concentric arcs in a Fusion 360 Drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Change the language for Titleblock and BOM in the drawing environment of Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Change-the-language-for-Titleblock-and-BOM-in-the-drawing-environment-of-Fusion-360" target="_blank">Change the language for Titleblock and BOM in the drawing environment of Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to access samples files for Fusion 360 tutorials"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-access-samples-files-for-Fusion-360-tutorials" target="_blank">How to access samples files for Fusion 360 tutorials</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to apply NPT threads in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-apply-NPT-threads-in-Fusion-360" target="_blank">How to apply NPT threads in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to enable Component Color Cycling on the Fusion 360 Mobile Application"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-enable-Component-Color-Cycling-on-the-Fusion-360-Mobile-Application" target="_blank">How to enable Component Color Cycling on the Fusion 360 Mobile Application</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to get a Fusion 360 Enthusiast license"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-get-a-Fusion-360-Enthusiast-license" target="_blank">How to get a Fusion 360 Enthusiast license</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to sign out from Autodesk Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-sign-out-from-Autodesk-Fusion-360" target="_blank">How to sign out from Autodesk Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Imported .STP file into Fusion does not contain 2D sketch data"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Imported-step-file-into-Fusion-does-not-contain-2D-sketch-data" target="_blank">Imported .STP file into Fusion does not contain 2D sketch data</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Inside of the Fusion 360 Tool Library (CAM), pressing the delete key will not delete the tool"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inside-of-the-Fusion-360-Tool-Library-CAM-pressing-the-delete-key-will-not-delete-the-tool" target="_blank">Inside of the Fusion 360 Tool Library (CAM), pressing the delete key will not delete the tool</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Installing Fusion 360 on Mac OS causes error message “CorruptError”"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Installing-Fusion-360-on-Mac-OS-you-get-the-error" target="_blank">Installing Fusion 360 on Mac OS causes error message “CorruptError”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Locally change size or orientation of appearance in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Locally-change-size-or-orientation-of-appearance-in-Fusion-360" target="_blank">Locally change size or orientation of appearance in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Converting Fusion 360 to DWG or DXF"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Converting-Fusion-360-to-DWG-or-DXF" target="_blank">Converting Fusion 360 to DWG or DXF</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"The Sheet Metal environment is missing in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Sheet-Metal-environment-is-missing-in-Fusion-360" target="_blank">The Sheet Metal environment is missing in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 simulation thermal analysis involving a heat source gives wrong results"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-simulation-thermal-analysis-involving-a-heat-source-gives-wrong-results" target="_blank">Fusion 360 simulation thermal analysis involving a heat source gives wrong results</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to export an STL file from an imported mesh file"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-export-an-STL-file-from-an-imported-mesh-file" target="_blank">How to export an STL file from an imported mesh file</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to Insert a Component into the Current Design in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Insert-a-Component-into-the-Current-Design-in-Fusion-360" target="_blank">How to Insert a Component into the Current Design in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to insert locally saved files into a Fusion 360 design"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-insert-locally-saved-files-into-a-Fusion-360-design" target="_blank">How to insert locally saved files into a Fusion 360 design</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to create new projects and edit an existing project in Fusion 360 web account"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-create-new-projects-and-edit-an-existing-project-in-Fusion-360-web-account" target="_blank">Unable to create new projects and edit an existing project in Fusion 360 web account</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to reset toolbar customization in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reset-toolbar-customization-in-Fusion-360" target="_blank">How to reset toolbar customization in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Dimension for thread in a drawing does not get updated correctly"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Dimension-for-thread-in-a-drawing-does-not-get-updated-correctly" target="_blank">Dimension for thread in a drawing does not get updated correctly</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can you change the language for the Fusion 360 Mobile App?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-you-change-the-language-for-the-Fusion-360-Mobile-App" target="_blank">Can you change the language for the Fusion 360 Mobile App?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to update graphics driver for Fusion 360 in Windows"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-update-graphics-driver-for-Fusion-360-in-Windows" target="_blank">How to update graphics driver for Fusion 360 in Windows</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Perspective of Fusion 360 model seems different than SketchUp"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Perspective-of-Fusion-360-model-seems-different-than-Sketch-Up" target="_blank">Perspective of Fusion 360 model seems different than SketchUp</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to extrude past certain distance in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-extrude-past-certain-distance-in-Fusion-360" target="_blank">Unable to extrude past certain distance in Fusion 360</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>July 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot move vector objects in Fusion 360 sketch"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-move-vector-objects-in-Fusion-360-sketch" target="_blank">Cannot move vector objects in Fusion 360 sketch</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to move bodies between components in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-move-bodies-between-components-in-Fusion-360" target="_blank">How to move bodies between components in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to renew an expired Fusion 360 subscription using a new credit card"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-renew-an-expired-Fusion-360-subscription-using-a-new-credit-card" target="_blank">How to renew an expired Fusion 360 subscription using a new credit card</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to get VEX EDR parts for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-get-VEX-EDR-parts-for-Fusion-360" target="_blank">How to get VEX EDR parts for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The fluid volume command is missing from the Create menu"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-fluid-volume-command-is-missing-from-the-Create-menu" target="_blank">The fluid volume command is missing from the Create menu</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Projects Missing from Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Projects-Missing-from-Fusion-360" target="_blank">Projects Missing from Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sufficient data not found to switch to offline mode in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sufficient-data-not-found-to-switch-to-offline-mode-in-Fusion-360" target="_blank">Sufficient data not found to switch to offline mode in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Surface body appears differently in Fusion 360 when compared to viewing on A360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Surface-body-appears-differently-in-Fusion-360-when-compared-to-viewing-on-A360" target="_blank">Surface body appears differently in Fusion 360 when compared to viewing on A360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The selected SVG file contains no information or some unsupported information"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-selected-SVG-file-contains-no-information-or-some-unsupported-information" target="_blank">The selected SVG file contains no information or some unsupported information</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to read measurement result and Fusion 360 shows weird number"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-read-measurement-result-and-Fusion-360-shows-weird-number" target="_blank">Unable to read measurement result and Fusion 360 shows weird number</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to set “Constrained Orbit” as default when shortcuts are set to “Solidworks”"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-set-Constrained-Orbit-as-default-when-shortcuts-are-set-to-Solidworks" target="_blank">Unable to set “Constrained Orbit” as default when shortcuts are set to “Solidworks”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Where should I save customized post processor files?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-should-I-save-customized-post-processor-files" target="_blank">Where should I save customized post processor files?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Parameters values are not updated correctly when using Fractional unit display preferences in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Parameters-values-are-not-updated-correctly-when-using-Fractional-unit-display-preferences-in-Fusion-360" target="_blank">Parameters values are not updated correctly when using Fractional unit display preferences in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Is it possible to install Fusion 360 on a specific drive?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-install-Fusion-360-on-a-specific-drivE" target="_blank">Is it possible to install Fusion 360 on a specific drive?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to turn off email notifications for recent activity on your Fusion 360 models"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-turn-off-email-notifications-for-recent-activity-on-your-Fusion-360-models" target="_blank">How to turn off email notifications for recent activity on your Fusion 360 models</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to download Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-download-Fusion-360" target="_blank">How to download Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to enable a preview feature in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-enable-a-preview-feature-in-Fusion-360" target="_blank">How to enable a preview feature in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 install fails on ssl.SSLError: [SSL: WRONG_VERSION_NUMBER] wrong version number (_ssl.c:2090)"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-install-fails-on-ssl-SSLError-SSL-WRONG-VERSION-NUMBER-wrong-version-number-ssl-c-2090" target="_blank">Fusion 360 install fails on ssl.SSLError: [SSL: WRONG_VERSION_NUMBER] wrong version number (_ssl.c:2090)</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Installation Errno 13: Permission Denied"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Installation-Errno-13-Permission-Denied" target="_blank">Fusion 360 Installation Errno 13: Permission Denied</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM toolpath error icon but no error message"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-toolpath-error-icon-but-no-error-message" target="_blank">CAM toolpath error icon but no error message</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM toolpath error: contour selection has missing selections"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-toolpath-error-contour-selection-has-missing-selections" target="_blank">CAM toolpath error: contour selection has missing selections</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM toolpath error: model has missing selections"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-toolpath-error-model-has-missing-selections" target="_blank">CAM toolpath error: model has missing selections</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM toolpath error: pocket selection has missing selections"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-toolpath-error-pocket-selection-has-missing-selections" target="_blank">CAM toolpath error: pocket selection has missing selections</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM toolpath error: stock solid has missing selections"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-toolpath-error-stock-solid-has-missing-selections" target="_blank">CAM toolpath error: stock solid has missing selections</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM workspace missing after failed update in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-workspace-missing-after-failed-update-in-Fusion-360" target="_blank">CAM workspace missing after failed update in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Black bar appears over design timeline in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Black-bar-appears-over-design-timeline-in-Fusion-360" target="_blank">Black bar appears over design timeline in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Applied appearances and textures are rotated when cloud rendering a Fusion 360 design"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Applied-appearances-and-textures-are-rotated-when-cloud-rendering-a-Fusion-360-design" target="_blank">Applied appearances and textures are rotated when cloud rendering a Fusion 360 design</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Accessing individual frames of turntable renderings in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Accessing-individual-frames-of-turntable-renderings-in-Fusion-360" target="_blank">Accessing individual frames of turntable renderings in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"“Sorry, you do not have the correct entitlements to try the Fusion 360 browser experience” error message"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sorry-you-do-not-have-the-correct-entitlements-to-try-the-Fusion-360-browser-experience-error-message" target="_blank">“Sorry, you do not have the correct entitlements to try the Fusion 360 browser experience” error message</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Rendering multiple material combinations for the same model in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Rendering-multiple-material-combinations-for-the-same-model-in-Fusion-360" target="_blank">Rendering multiple material combinations for the same model in Fusion 360</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>June<SPAN> </SPAN>2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="499" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to insert DXF files in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-import-DXF-files-in-Fusion-360" target="_blank">How to insert DXF files in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Node does not exist when merging to the master branch"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Node-does-not-exist-when-merging-to-the-master-branch" target="_blank">Node does not exist when merging to the master branch</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to insert a mesh body into Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-insert-a-mesh-body-into-Fusion-360" target="_blank">How to insert a mesh body into Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to move projects, folders and designs from a single user hub to a different team hub"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-move-projects-folders-and-designs-from-a-single-user-Hub-to-a-different-Team-Hub" target="_blank">How to move projects, folders and designs from a single user hub to a different team hub</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to use the local translation process to open files in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-the-local-translation-process-to-open-files-in-Fusion-360" target="_blank">How to use the local translation process to open files in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to upload a file to the Data Panel in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-upload-a-file-to-the-Data-Panel-in-Fusion-360" target="_blank">How to upload a file to the Data Panel in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to Change Units in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Change-Units-in-Fusion-360" target="_blank">How to Change Units in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"‘Unable To Synchronize Projects’ error message in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-To-Synchronize-Projects-error-message-in-Fusion-360" target="_blank">‘Unable To Synchronize Projects’ error message in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can I accurately measure STL file dimensions within Fusion 360?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-I-accurately-measure-STL-file-dimensions-within-Fusion-360" target="_blank">Can I accurately measure STL file dimensions within Fusion 360?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Create copy command missing from the Move dialog within Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-copy-command-missing-from-the-Move-dialog-within-Fusion-360" target="_blank">Create copy command missing from the Move dialog within Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - after Sing-In, Stuck at offline Mode"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-after-Sing-In-Stuck-at-offline-Mode" target="_blank">Fusion 360 - after Sing-In, Stuck at offline Mode</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - Unable to connect to Internet"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Unable-to-connect-to-Internet" target="_blank">Fusion 360 - Unable to connect to Internet</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion Dimensions 10X greater on imported .STL files"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-Dimensions-10X-greater-on-imported-STL-files" target="_blank">Fusion Dimensions 10X greater on imported .STL files</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How many cloud credits does it cost to make a turntable or motion study rendering in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-many-cloud-credits-does-it-cost-to-make-a-turntable-or-motion-study-rendering-in-Fusion-360" target="_blank">How many cloud credits does it cost to make a turntable or motion study rendering in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to expand and collapse the Browser window in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-expand-and-collapse-the-Browser-window-in-Fusion-360" target="_blank">How to expand and collapse the Browser window in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to render a motion study in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/how-to-render-a-motion-study-in-fusion-360" target="_blank">How to render a motion study in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to set Mooney-Rivlin properties for a material in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Mooney-Rivlin-properties-for-a-material-in-Fusion-360" target="_blank">How to set Mooney-Rivlin properties for a material in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Parameter or other dialog is missing in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Parameter-or-other-dialog-is-missing-in-Fusion-360" target="_blank">Parameter or other dialog is missing in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to delete a design in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-delete-a-design-in-Fusion-360" target="_blank">Unable to delete a design in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot select linked component to create pattern in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-select-linked-component-to-create-pattern-in-Fusion-360" target="_blank">Cannot select linked component to create pattern in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 does not display a count-down timer displaying when the term will expire"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-does-not-display-a-count-down-timer-displaying-when-the-term-will-expire" target="_blank">Fusion 360 does not display a count-down timer displaying when the term will expire</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 hangs infinitely or crashes while creating sketch"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-hangs-infinitely-or-crashes-while-creating-sketch" target="_blank">Fusion 360 hangs infinitely or crashes while creating sketch</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to switch hubs on the Fusion 360 Mobile App"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-switch-hubs-on-the-Fusion-360-Mobile-App" target="_blank">How to switch hubs on the Fusion 360 Mobile App</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Parameter dialog box is missing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Parameter-dialog-box-is-missing" target="_blank">Parameter dialog box is missing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to access the Fusion 360 CAM Tool Library"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-access-the-Fusion-360-CAM-Tool-Library" target="_blank">Unable to access the Fusion 360 CAM Tool Library</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can’t perform CAD operations in Fusion 360 mobile app"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-t-perform-CAD-operations-in-Fusion-360-mobile-app" target="_blank">Can’t perform CAD operations in Fusion 360 mobile app</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to Convert a Mesh to T-Spline in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Convert-a-Mesh-to-T-Spline-in-Fusion-360" target="_blank">How to Convert a Mesh to T-Spline in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"In Fusion 360, you are unable to insert a model through manufacturer part from parts4cad"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/In-Fusion-360-you-are-unable-to-insert-a-Parts4CAD-model" target="_blank">In Fusion 360, you are unable to insert a model through manufacturer part from parts4cad</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Load set does not exists warning when using point mass in a simulation with Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Load-set-does-not-exists-warning-when-using-point-mass-in-a-simulation-with-Fusion-360" target="_blank">Load set does not exists warning when using point mass in a simulation with Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Strange behavior seen when applying appearances using selection sets created from features in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Strange-behavior-seen-when-applying-appearances-using-selection-sets-created-from-features-in-Fusion-360" target="_blank">Strange behavior seen when applying appearances using selection sets created from features in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"What is the road map for the Fusion 360 drawing environment"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/What-is-the-road-map-for-the-Fusion-360-drawing-environment" target="_blank">What is the road map for the Fusion 360 drawing environment</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Where to find the certification program for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-to-find-the-certification-program-for-Fusion-360" target="_blank">Where to find the certification program for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAM error messages"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAM-error-messages" target="_blank">CAM error messages</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sketch grid orientation is changed unintentionally based on the sketch plane selection in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sketch-grid-orientation-is-changed-unintentionally-based-on-the-sketch-plane-selection-in-Fusion-360" target="_blank">Sketch grid orientation is changed unintentionally based on the sketch plane selection in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The Fusion 360 right click marking menu is slow to appear on external monitors with Mac OS"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Fusion-360-right-click-marking-menu-is-slow-to-appear-on-external-monitors-with-Mac-OS" target="_blank">The Fusion 360 right click marking menu is slow to appear on external monitors with Mac OS</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion360: ssl.SSLEOFError: EOF occurred in violation of protocol (_ssl.c:720)"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion360-ssl-SSLEOFError-EOF-occurred-in-violation-of-protocol-ssl-c-720" target="_blank">Fusion360: ssl.SSLEOFError: EOF occurred in violation of protocol (_ssl.c:720)</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>May 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="457" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to export Solidworks assembly files and open them in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-export-Solidworks-assembly-files-and-open-them-in-Fusion-360" target="_blank">How to export Solidworks assembly files and open them in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Advantages of Team Hubs in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Advantages-of-Team-Hubs-in-Fusion-360" target="_blank">Advantages of Team Hubs in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can Fusion 360 be run on all Windows User Accounts when installed through an Administrator Account?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-Fusion-360-be-run-on-all-Windows-User-Accounts-when-installed-through-an-Administrator-Account" target="_blank">Can Fusion 360 be run on all Windows User Accounts when installed through an Administrator Account?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can Fusion 360 send G code directly to a CNC machine?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-Fusion-360-send-G-code-directly-to-a-CNC-machine" target="_blank">Can Fusion 360 send G code directly to a CNC machine?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can I install Fusion 360 on a USB removable drive?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-I-install-Fusion-360-on-a-USB-removable-drive" target="_blank">Can I install Fusion 360 on a USB removable drive?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Dimensioning Rho for a conic curve in a Fusion 360 sketch"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Dimensioning-Rho-for-a-conic-curve-in-a-Fusion-360-sketch" target="_blank">Dimensioning Rho for a conic curve in a Fusion 360 sketch</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Export format options for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Export-format-options-for-Fusion-360" target="_blank">Export format options for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 on macOS: The ability to select mulitple holes for threading works intermittently"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-on-macOS-The-ability-to-select-mulitple-holes-for-threading-works-intermittently" target="_blank">Fusion 360 on macOS: The ability to select mulitple holes for threading works intermittently</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to add subcomponents to Parts List in Fusion 360 Drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-subcomponents-to-Parts-List-in-Fusion-360-Drawing" target="_blank">How to add subcomponents to Parts List in Fusion 360 Drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to import DWG files into Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-import-DWG-files-into-Fusion-360" target="_blank">How to import DWG files into Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to import SVG files in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-import-SVG-files-in-Fusion-360" target="_blank">How to import SVG files in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to move designs between projects in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-move-designs-between-projects-in-Fusion-360" target="_blank">How to move designs between projects in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to upload a SolidWorks assembly with virtual components with Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-upload-a-SolidWorks-assembly-with-virtual-components-with-Fusion-360" target="_blank">How to upload a SolidWorks assembly with virtual components with Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Measurements/Dimensions are not exact in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Measurements-Dimensions-are-not-exact-in-Fusion-360" target="_blank">Measurements/Dimensions are not exact in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to enter non-English characters into text fields in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-enter-non-English-characters-into-text-fields-in-Fusion-360" target="_blank">Unable to enter non-English characters into text fields in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Black dialog appears when trying to register for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Black-dialog-appear-when-trying-to-register-for-Fusion-360" target="_blank">Black dialog appears when trying to register for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot get Fusion 360 to work on my computer."}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-get-Fusion-360-to-work-on-my-computer" target="_blank">Cannot get Fusion 360 to work on my computer.</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Certain thread types cannot be applied to hole faces in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Certain-thread-types-cannot-be-applied-to-hole-faces-in-Fusion-360" target="_blank">Certain thread types cannot be applied to hole faces in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Certain TTF single line fonts are recognized on Windows but not on Mac OS when working in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Certain-TTF-single-line-fonts-are-recognized-on-Windows-but-not-on-Mac-OS-when-working-in-Fusion-360" target="_blank">Certain TTF single line fonts are recognized on Windows but not on Mac OS when working in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Deleting last previewed render causes Fusion 360 to freeze"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Deleting-last-previewed-render-causes-Fusion-360-to-freeze" target="_blank">Deleting last previewed render causes Fusion 360 to freeze</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Error : .f3d could not be uploaded due to access denided"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-f3d-could-not-be-uploaded-due-to-access-denided" target="_blank">Error : .f3d could not be uploaded due to access denided</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Error 1920 when install Autodesk PrintStudio v1.6.5 on Windows 10"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Autodesk-PrintStudio-v1-6-5-Win64" target="_blank">Error 1920 when install Autodesk PrintStudio v1.6.5 on Windows 10</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Exported IGES file from Fusion 360 does not open in FANUC RoboGuide"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Exported-IGES-file-from-Fusion-360-does-not-open-in-FANUC-RoboGuide" target="_blank">Exported IGES file from Fusion 360 does not open in FANUC RoboGuide</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 - urlopen error [WinError 10013] An attempt was made to access a socket in a way forbidden by its access permissions"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-urlopen-error-WinError-10013-An-attempt-was-made-to-access-a-socket-in-a-way-forbidden-by-its-access-permissions" target="_blank">Fusion 360 - urlopen error [WinError 10013] An attempt was made to access a socket in a way forbidden by its access permissions</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 CAM: 2D Contour strategy is ignoring plunge feedrate"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-CAM-2D-Contour-strategy-is-ignoring-plunge-feedrate" target="_blank">Fusion 360 CAM: 2D Contour strategy is ignoring plunge feedrate</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 crashes when updating a drawing"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-crashes-when-updating-a-drawing" target="_blank">Fusion 360 crashes when updating a drawing</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Imported DXF Sketches are altered when moved in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Imported-DXF-Sketches-are-altered-when-moved-in-Fusion-360" target="_blank">Imported DXF Sketches are altered when moved in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Inspect Probe ignore visibility of part in Fusion Simulation Results"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inspect-Probe-ignore-visibility-in-Fusion-Sim-Results" target="_blank">Inspect Probe ignore visibility of part in Fusion Simulation Results</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Modes 4 through 6 have nonzero frequency in a Fusion 360 modal analysis"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Modes-4-through-6-have-nonzero-frequency-in-a-Fusion-360-modal-analysis" target="_blank">Modes 4 through 6 have nonzero frequency in a Fusion 360 modal analysis</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"No appearance is shown when a material is selected in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-appearance-is-shown-when-a-material-is-selected-in-Fusion-360" target="_blank">No appearance is shown when a material is selected in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Post processor folder is reset after each update"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Post-processor-folder-is-reset-after-each-update" target="_blank">Post processor folder is reset after each update</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Inspect measurements and Drawing dimensions are incorrect for a partially threaded shaft in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inspect-measurements-and-Drawing-dimensions-are-incorrect-for-a-partially-threaded-shaft-in-Fusion-360" target="_blank">Inspect measurements and Drawing dimensions are incorrect for a partially threaded shaft in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Right click menus disappear when crossing viewport borders in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Right-click-menus-disappear-when-crossing-viewport-borders-in-Fusion-360" target="_blank">Right click menus disappear when crossing viewport borders in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The \u201cQuit\u201d keyboard shortcut does not work in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Quit-keyboard-shortcut-does-not-work-in-Fusion-360" target="_blank">The “Quit” keyboard shortcut does not work in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to launch Fusion due to missing \u201cpython33.dll\u201d"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-launch-Fusion-due-to-missing-python33-dll" target="_blank">Unable to launch Fusion due to missing “python33.dll”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Using Adlogin.exe and Microsoft Network Monitor to troubleshoot Fusion 360 Sign-in issues"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Using-Adlogin-exe-and-Microsoft-Network-Monitor-to-troubleshoot-Fusion-360-Sign-in-issues" target="_blank">Using Adlogin.exe and Microsoft Network Monitor to troubleshoot Fusion 360 Sign-in issues</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>April 2017</STRONG></EM></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="609" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Inserted Title Block in Fusion 360 contains more than one block and an error message appears"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inserted-Title-Block-in-Fusion-360-contains-more-than-one-block-and-cannot-be-inserted" target="_blank">Inserted Title Block in Fusion 360 contains more than one block and an error message appears</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Nonlinear static stress analysis fails with \u201cError: Internal solver error\u201d"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Nonlinear-static-stress-analysis-fails-with-Error-Internal-solver-error" target="_blank">Fusion 360 Nonlinear static stress analysis fails with “Error: Internal solver error”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to edit the toolbar in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-edit-the-toolbar-in-Fusion-360" target="_blank">How to edit the toolbar in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to use shared CAM Assets in a Fusion 360 Team Hub"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-shared-CAM-Assets-in-a-Fusion-360-Team-Hub" target="_blank">How to use shared CAM Assets in a Fusion 360 Team Hub</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Are my Fusion 360 designs private and secure?"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-my-Fusion-360-designs-private-and-secure" target="_blank">Are my Fusion 360 designs private and secure?</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Disable creation of automatic sketch constraints in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Disable-creation-of-automatic-sketch-constraints-in-Fusion-360" target="_blank">Disable creation of automatic sketch constraints in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to adjust the opacity of a body in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-adjust-the-opacity-of-a-body-in-Fusion-360" target="_blank">How to adjust the opacity of a body in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change the language in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-default-language-for-Fusion-360" target="_blank">How to change the language in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to install Fusion 360 on multiple computers"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-install-Fusion-360-on-multiple-computers" target="_blank">How to install Fusion 360 on multiple computers</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to do a manual reset of the Data Panel in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-do-a-manual-reset-of-the-Data-Panel-in-Fusion-360" target="_blank">How to do a manual reset of the Data Panel in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to reset the orbit pivot point in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reset-the-orbit-pivot-point-in-Fusion-360" target="_blank">How to reset the orbit pivot point in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"A new parameter is created each time the distance of a Plane Along Path is altered in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/A-new-parameter-is-created-each-time-the-distance-of-a-Plane-Along-Path-is-altered-in-Fusion-360" target="_blank">A new parameter is created each time the distance of a Plane Along Path is altered in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 error on startup"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-error-on-startup" target="_blank">Fusion 360 error on startup</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 fails to create drawing for selected components"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-fails-to-create-drawing-for-selected-components" target="_blank">Fusion 360 fails to create drawing for selected components</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Issues with underlined text in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Issues-with-underlined-text-in-Fusion-360" target="_blank">Issues with underlined text in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Moving sketched rectangles in Fusion 360 that have arcs attached to them causes the sketch to become \u201cstuck\u201d in the work space"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Moving-sketched-rectangles-in-Fusion-360-that-have-arcs-attached-to-them-causes-the-sketch-to-become-stuck-in-the-work-space" target="_blank">Moving sketched rectangles in Fusion 360 that have arcs attached to them causes the sketch to become “stuck” in the work space</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Selected sketch contours are not previewed in the CAM Contour Editor of Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Selected-sketch-contours-are-not-previewed-in-the-CAM-Contour-Editor-of-Fusion-360" target="_blank">Selected sketch contours are not previewed in the CAM Contour Editor of Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to select the entire sketch as the sweep path for the sweep function in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-select-the-entire-sketch-as-the-sweep-path-for-the-sweep-function-in-Fusion-360" target="_blank">Unable to select the entire sketch as the sweep path for the sweep function in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Problems with installing and running Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Problems-with-installing-and-running-Fusion-360" target="_blank">Problems with installing and running Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Add proxy server information to Network Preferences in Fusion 360 (macOS)"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Add-proxy-server-information-to-Network-Preferences-in-Fusion-360-MacOS" target="_blank">Add proxy server information to Network Preferences in Fusion 360 (macOS)</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Add proxy server information to Network Preferences in Fusion 360 (Windows)"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Add-proxy-server-information-to-Network-Preferences-in-Fusion-360-Windows" target="_blank">Add proxy server information to Network Preferences in Fusion 360 (Windows)</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"\u201cSTIFFNESS MATRIX SINGULAR OR NON-POSITIVE DEFINITE\u201d message with analysis failure in Fusion 360 Simulation"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/STIFFNESS-MATRIX-SINGULAR-OR-NON-POSITIVE-DEFINITE-message-with-analysis-failure-in-Fusion-360-Simulation" target="_blank">“STIFFNESS MATRIX SINGULAR OR NON-POSITIVE DEFINITE” message with analysis failure in Fusion 360 Simulation</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Autodesk Fusion 360 simulation \u201cError: Mesh failed: Body Failure\u201d and \u201cError: Please inspect mesh failures.\u201d"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Autodesk-Fusion-360-simulation-Error-Mesh-failed-Body-Failure-and-Error-Please-inspect-mesh-failures" target="_blank">Autodesk Fusion 360 simulation “Error: Mesh failed: Body Failure” and “Error: Please inspect mesh failures.”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Cannot sketch on a flat lofted face in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-sketch-on-a-flat-lofted-face-in-Fusion-360" target="_blank">Cannot sketch on a flat lofted face in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Comments in a design are deleted when focus is taken from Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Comments-in-a-design-are-deleted-when-focus-is-taken-from-Fusion-360" target="_blank">Comments in a design are deleted when focus is taken from Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Computer Freezes and requires system restart when launching Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Computer-Freezes-and-requires-system-restart-when-launching-Fusion-360" target="_blank">Computer Freezes and requires system restart when launching Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Configuring anti-virus software for use with Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Configuring-anti-virus-software-for-use-with-Fusion-360" target="_blank">Configuring anti-virus software for use with Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Corrupted file warning with t-spline body in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Corrupted-file-warning-with-t-spline-body-in-Fusion-360" target="_blank">Corrupted file warning with t-spline body in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Diagnose Interference from background processes in Windows using Safe Mode"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Diagnose-Interference-from-background-processes-in-Windows-using-Safe-Mode" target="_blank">Diagnose Interference from background processes in Windows using Safe Mode</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Exported DWG from Fusion 360 does not open or opens incorrectly in 3rd party viewer"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Exported-DWG-from-Fusion-360-does-not-open-or-opens-incorrectly-in-3rd-party-viewer" target="_blank">Exported DWG from Fusion 360 does not open or opens incorrectly in 3rd party viewer</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"False \u201cTerm has Expired\u201d or \u201cUsage Limits Exceeded\u201d reported in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/False-Term-has-Expired-reported-in-Fusion-360" target="_blank">False “Term has Expired” or “Usage Limits Exceeded” reported in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 crashes when the \u201cSelect All\u201d selection filter is disabled"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-crashes-when-the-Select-All-selection-filter-is-disabled" target="_blank">Fusion 360 crashes when the “Select All” selection filter is disabled</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 Error: \u201cThe browser process exits unexpectedly error in Fusion 360\u201d"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-Error-The-browser-process-exits-unexpectedly-error-in-Fusion-360" target="_blank">Fusion 360 Error: “The browser process exits unexpectedly error in Fusion 360”</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 generates \u201cUnable to open\u201d error message"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-generates-Unable-to-open-error-message" target="_blank">Fusion 360 generates “Unable to open” error message</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fusion 360 simulation study selection window is not displaying properly and some of the study types cannot be selected in MacOS"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fusion-360-simulation-study-selection-window-is-not-displaying-properly-and-some-of-the-study-types-cannot-be-selected-in-MacOS" target="_blank">Fusion 360 simulation study selection window is not displaying properly and some of the study types cannot be selected in MacOS</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change a simulation parameter per a warning message in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-a-simulation-parameter-per-a-warning-message-in-Fusion-360" target="_blank">How to change a simulation parameter per a warning message in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to collect the Diagnostic Log Files for Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-find-and-share-the-Diagnostic-Log-Files-in-the-Fusion-360-Help-menu" target="_blank">How to collect the Diagnostic Log Files for Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Creating a sketch on a face in Fusion 360 causes unintended profiles to be extruded"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Creating-a-sketch-on-a-face-in-Fusion-360-causes-unintended-profiles-to-be-extruded" target="_blank">Creating a sketch on a face in Fusion 360 causes unintended profiles to be extruded</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Mesh bodies saved in OBJ format from Fusion 360 result in empty files"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Mesh-bodies-saved-in-OBJ-format-from-Fusion-360-result-in-empty-files" target="_blank">Mesh bodies saved in OBJ format from Fusion 360 result in empty files</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Perpendicular sketch constraint is previewed but not applied in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Perpendicular-sketch-constraint-is-previewed-but-not-applied-in-Fusion-360" target="_blank">Perpendicular sketch constraint is previewed but not applied in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Projected solid bodies do not result in a closed contour in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Projected-solid-bodies-do-not-result-in-a-closed-contour-in-Fusion-360" target="_blank">Projected solid bodies do not result in a closed contour in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sketch is improperly flagged as \u201cFully Constrained\u201d in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sketch-is-improperly-flagged-as-Fully-Constrained-in-Fusion-360" target="_blank">Sketch is improperly flagged as “Fully Constrained” in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sketch origin cannot be selected in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sketch-origin-cannot-be-selected-in-Fusion-360" target="_blank">Sketch origin cannot be selected in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Sketches created with relations coincident to the origin of a Plane Along Path are not moved if the path is moved"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sketches-created-with-relations-coincident-to-the-origin-of-a-Plane-Along-Path-are-not-moved-if-the-path-is-moved" target="_blank">Sketches created with relations coincident to the origin of a Plane Along Path are not moved if the path is moved</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Solve status for a Fusion 360 simulation does not change after a repair"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Solve-status-for-a-Fusion-360-simulation-does-not-change-after-a-repair" target="_blank">Solve status for a Fusion 360 simulation does not change after a repair</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The Fusion 360 Browser tree is reduced when the Compute All command is run"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Fusion-360-Browser-tree-is-reduced-when-the-Compute-All-command-is-run" target="_blank">The Fusion 360 Browser tree is reduced when the Compute All command is run</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Trouble Using Screencast"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Trouble-Using-Screencast" target="_blank">Trouble Using Screencast</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to create new material library on a Mac in Fusion 360"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-create-new-material-library-on-a-Mac-in-Fusion-360" target="_blank">Unable to create new material library on a Mac in Fusion 360</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to export PDF of 2D drawing created in Fusion 360 on a Mac"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-export-PDF-of-2D-drawing-created-in-Fusion-360-on-a-Mac" target="_blank">Unable to export PDF of 2D drawing created in Fusion 360 on a Mac</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"WinError 1392 during Fusion 360 Installation"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/WinError-1392-during-Fusion-360-Installation" target="_blank">WinError 1392 during Fusion 360 Installation</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"You are receiving an \u201cError thrown by OSS\u201d message when Copying a file in the Fusion 360 Data Panel"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/You-are-receiving-an-Error-thrown-by-OSS-message-when-Copying-a-file-in-the-Fusion-360-Data-Panel" target="_blank">You are receiving an “Error thrown by OSS” message when Copying a file in the Fusion 360 Data Panel</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><EM><STRONG>March 2017</STRONG></EM></FONT></P> <P><A href="http://knowledge.autodesk.com/article/Body-groups-are-unselectable-in-the-CAM-browser-of-Fusion-360" target="_blank">Body groups are unselectable in the CAM browser of Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Changing-the-opacity-of-a-body-does-not-work-in-Fusion-360" target="_blank">Changing the opacity of a body does not work in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Sketched-arcs-reverse-direction-when-connected-by-a-line-in-Fusion-360" target="_blank">Sketched arcs reverse direction when connected by a line in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/The-Myriad-CAD-font-cannot-be-exploded-or-extruded-in-Fusion-360" target="_blank">The Myriad CAD font cannot be exploded or extruded in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Designs-with-non-standard-English-characters-in-their-name-will-not-generate-a-Setup-Sheet-in-Fusion-360-for-Mac" target="_blank">Designs with non-standard English characters in their name will not generate a Setup Sheet in Fusion 360 for Mac</A><BR /> <A href="http://knowledge.autodesk.com/article/Trying-to-open-Fusion-360-in-another-Space-on-a-Mac-causes-elements-of-the-user-interface-to-not-appear" target="_blank">Trying to open Fusion 360 in another Space on a Mac causes elements of the user interface to not appear</A><BR /> <A href="http://knowledge.autodesk.com/article/Using-a-right-angle-head-attachment-with-Fusion-360-s-CAM-capabilities" target="_blank">Using a right angle head attachment with Fusion 360’s CAM capabilities</A> </P> <P><A href="http://knowledge.autodesk.com/article/Clearing-out-residual-files-from-a-failed-installation-and-reinstalling-Fusion-360" target="_blank">Clearing out residual files from a failed installation and reinstalling Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Fusion-360-crashes-upon-startup-with-a-new-installation-Duet-Display-or-Kairos-Driver-issue" target="_blank">Fusion 360 crashes upon startup with a new installation (Duet Display or Kairos Driver issue)</A></P> <P><A href="http://knowledge.autodesk.com/article/3D-printed-objects-do-not-match-model-dimensions-from-Fusion-360" target="_blank">3D printed objects do not match model dimensions from Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Animation-fade-out-behavior-is-abrupt-with-certain-appearances-in-Fusion-360" target="_blank">Animation fade out behavior is abrupt with certain appearances in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-avoid-bored-geometry-in-a-Turning-Face-Profile-operation-in-Fusion-360-HSM-CAM" target="_blank">How to avoid bored geometry in a Turning > Face Profile operation in Fusion 360/ HSM CAM</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-save-Fusion-360-designs-for-use-with-M3D-Printers" target="_blank">How to save Fusion 360 designs for use with M3D Printers</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-use-Manual-NC-options-to-manually-add-code-with-Fusion-360-HSM-CAM" target="_blank">How to use Manual NC options to manually add code with Fusion 360/HSM CAM</A><BR /> <A href="http://knowledge.autodesk.com/article/Truncating-the-design-timeline-when-a-component-is-activated-in-Fusion-360" target="_blank">Truncating the design timeline when a component is activated in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Adaptive-clearing-strategies-appear-to-be-ignoring-Rest-Machining-settings-in-Fusion-360-s-CAM-workspace" target="_blank">Adaptive clearing strategies appear to be ignoring Rest Machining settings in Fusion 360’s CAM workspace</A><BR /> <A href="http://knowledge.autodesk.com/article/Fusion-360-Delay-when-switching-between-designs-and-changing-to-the-CAM-work-space" target="_blank">Fusion 360 - Delay when switching between designs and changing to the CAM work space</A><BR /> <A href="http://knowledge.autodesk.com/article/Switching-between-sheets-in-a-Fusion-360-drawing-causes-the-design-to-be-flagged-as-if-changes-have-been-made" target="_blank">Switching between sheets in a Fusion 360 drawing causes the design to be flagged as if changes have been made</A> </P> <P><A href="http://knowledge.autodesk.com/article/Error-Database-table-is-locked-when-installing-or-updating-Fusion-360" target="_blank">Error: “Database table is locked” when installing or updating Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Converting-A360-Team-Trial-to-Subscribed-state" target="_blank">Converting Fusion Team trial to subscribed state</A> </P> <P><A href="http://knowledge.autodesk.com/article/Fusion-360-installation-troubleshooting" target="_blank">Fusion 360 installation troubleshooting</A><BR /> <A href="http://knowledge.autodesk.com/article/Fusion-360" target="_blank">Fusion 360 Lab installation works under Administrator account and fails to open with a student account</A></P> <P><A href="http://knowledge.autodesk.com/article/Changing-the-default-external-g-code-editor-in-Fusion-360" target="_blank">Changing the default external g-code editor in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-add-a-Post-Processor-to-your-Personal-Posts-in-Fusion-360" target="_blank">How to add a Post Processor to your Personal Posts in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-edit-contours-in-Fusion-360-CAM" target="_blank">How to edit contours in Fusion 360 CAM</A><BR /> <A href="http://knowledge.autodesk.com/article/Lead-in-angles-for-a-Turning-Profile-are-not-generated-correctly-with-roughing-passes-enabled-in-Fusion-360" target="_blank">Lead-in angles for a Turning Profile are not generated correctly with roughing passes enabled in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Project-avatars-are-gone-after-Fusion-360-updates" target="_blank">Project avatars are gone after Fusion 360 updates</A><BR /> <A href="http://knowledge.autodesk.com/article/Sketch-contours-copied-from-the-XZ-plane-are-inverted-when-pasted-into-a-new-sketch-in-Fusion-360" target="_blank">Sketch contours copied from the XZ plane are inverted when pasted into a new sketch in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Unexpected-results-with-Hole-feature-extents-set-to-Through-All-in-Fusion-360" target="_blank">Unexpected results with Hole feature extents set to “Through All” in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Viewing-Fusion-360-designs-in-VR" target="_blank">Viewing Fusion 360 designs in VR</A><BR /> <A href="http://knowledge.autodesk.com/article/Working-with-lead-in-out-moves-in-a-Turning-Profile-operation-in-Fusion-360" target="_blank">Working with lead-in/out moves in a Turning Profile operation in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-share-a-link-to-a-design-with-project-collaborators-in-Fusion-360" target="_blank">How to share a link to a design with project collaborators in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Fusion-360-crashes-when-left-idle-for-an-extended-period-of-time" target="_blank">Fusion 360 crashes when left idle for an extended period of time</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-setup-2D-adaptive-clearing-strategies-to-do-finishing-passes-in-the-Z-direction-in-Fusion-360-CAM-and-HSM-products" target="_blank">How to setup 2D adaptive clearing strategies to do finishing passes in the Z direction in Fusion 360 CAM and HSM products</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-remove-a-Linked-Component-XRef-from-the-timeline" target="_blank">How to remove a Linked Component / XRef from the timeline</A>  <BR /> <A href="http://knowledge.autodesk.com/article/How-to-add-a-custom-3D-printer-to-the-3D-Print-Utility-in-Fusion-360" target="_blank">How to add a custom 3D printer to the 3D Print Utility in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Fusion-360-Sign-in-Failure-Due-to-Service-Outage" target="_blank">Fusion 360 - Sign in Failure Due to Service Outage</A></P> <P> </P> <P><FONT size="3"><EM><STRONG>February 2017</STRONG></EM></FONT></P> <P><A href="http://knowledge.autodesk.com/article/How-to-enter-the-Fusion-360-Monthly-Challenge" target="_blank">How to enter the Fusion 360 Monthly Challenge</A> </P> <P><A href="https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Adaptive-clearing-strategies-appear-to-use-a-rectangular-stock-despite-having-a-cylindrical-stock-setup-in-Fusion-360-and-the-HSM-products.html" target="_blank">Adaptive clearing strategies appear to use a rectangular stock despite having a cylindrical stock setup in Fusion 360 and the HSM products</A></P> <P><A href="https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/How-to-generate-G-code-from-a-sketch.html" target="_blank">How to generate G code from a sketch in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-toggle-draft-and-zebra-analysis-on-and-off" target="_blank">How to toggle draft and zebra analysis on and off</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-convert-a-3d-scan-stl-mesh-into-a-solid-body-within-Fusion-360" target="_blank">How to convert a 3d scan *.stl mesh into a solid body within Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Windows-Error-740-The-Requested-Operation-Requires-Elevation" target="_blank">WinError 740 – The Requested Operation Requires Elevation</A> </P> <P><A href="http://knowledge.autodesk.com/article/CAM-templates-are-not-saved-to-the-CAMTemplates-folder-from-Fusion-360" target="_blank">CAM templates are not saved to the CAMTemplates folder from Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/CAM-toolpaths-are-invalidated-when-component-visibility-is-changed-in-Fusion-360" target="_blank">CAM toolpaths are invalidated when component visibility is changed in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Creating-first-and-third-angle-projected-views-in-Fusion-360" target="_blank">Creating first and third angle projected views in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Finishing-passes-do-not-follow-confinement-offsets-in-Fusion-360" target="_blank">Finishing passes do not follow confinement offsets in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Limiting-permissions-on-shared-tool-libraries-in-Fusion-360" target="_blank">Limiting permissions on shared tool libraries in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Managing-CAM-templates-in-Fusion-360" target="_blank">Managing CAM templates in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Mirrored-sketch-entities-are-not-previewed-correctly-in-Fusion-360" target="_blank">Mirrored sketch entities are not previewed correctly in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Selecting-decimal-inches-as-a-measurement-unit-in-the-Android-Fusion-360-app-gives-results-in-decimal-feet" target="_blank">Selecting decimal inches as a measurement unit in the Android Fusion 360 app gives results in decimal feet</A><BR /> <A href="http://knowledge.autodesk.com/article/The-Order-by-Tool-function-does-not-work-when-both-patterns-and-WCS-duplicates-exist-in-Fusion-360" target="_blank">The Order by Tool function does not work when both patterns and WCS duplicates exist in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/UI-elements-from-Fusion-360-float-on-top-of-other-applications" target="_blank">UI elements from Fusion 360 float on top of other applications</A> </P> <P><A href="http://knowledge.autodesk.com/article/Data-limits-for-Fusion-360" target="_blank">Data limits for Fusion 360</A><BR /> <A href="https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/F0-feed-rates-after-chamfering-plunge-moves-in-Fusion-360.html" target="_blank">F0 feed rates after chamfering plunge moves in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Fusion-360-crashes-due-to-installation-of-outdated-add-ins-DXF-for-Laser-or-Helical-Gear-Generator" target="_blank">Fusion 360 crashes due to installation of outdated add-ins, DXF for Laser or Helical Gear Generator</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-animate-joints-in-Fusion-360" target="_blank">How to animate joints in Fusion 360</A><BR /> <A href="https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/How-to-install-a-cloud-tool-library-in-Fusion-360.html" target="_blank">How to install a cloud tool library in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Paste-vs-Paste-New-in-Fusion-360" target="_blank">Paste vs. Paste New in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/Screencasts-do-not-include-Fusion-360-ribbon-browser-and-intended-audio" target="_blank">Screencasts do not include Fusion 360 ribbon, browser, and intended audio</A> </P> <P><A href="http://knowledge.autodesk.com/article/Fusion-360-crashes-upon-waking-from-sleep-in-Mac-OS-Outdated-Version-of-Autodesk-Screencast" target="_blank">Fusion 360 crashes upon waking from sleep in Mac OS: Outdated Version of Autodesk Screencast</A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-import-a-cps-file-from-the-Autodesk-CAM-Post-Library-into-Fusion-360" target="_blank">How to import a *.cps file from the Autodesk CAM Post Library into Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-move-copy-a-sketch-face-body-or-component-in-Fusion-360" target="_blank">How to move/copy a sketch, face, body or component in Fusion 360</A><BR /> <A href="http://knowledge.autodesk.com/article/How-to-Use-Fusion-360-s-Interference-Detection-to-Avoid-Cutting-Into-Your-Fixtures" target="_blank">How to Use Fusion 360’s Interference Detection to Avoid Cutting Into Your Fixtures</A> </P> <P><A href="http://knowledge.autodesk.com/article/An-interference-is-reported-by-the-Simulation-Pre-check-in-Fusion" target="_blank">An interference is reported by the Simulation Pre-check in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-remove-the-in-use-by-flag-from-copied-Fusion-360-design-in-Data-Panel-thumbnail-information" target="_blank">How to remove the “in use by” flag from copied Fusion 360 design in Data Panel thumbnail information</A> </P> <P><A href="http://knowledge.autodesk.com/article/Toolpath-for-text-does-not-generate-properly-if-the-component-was-moved-in-Fusion-360-CAM" target="_blank">Toolpath for text does not generate properly if the component was moved in Fusion 360 CAM</A></P> <P><A href="http://knowledge.autodesk.com/article/Unable-to-restart-Fusion-360-after-closing-the-initial-launch-after-installation" target="_blank">Unable to restart Fusion 360 after closing the initial launch after installation</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-locate-uninstall-and-add-an-Add-In-from-the-Autodesk-App-Store-in-Fusion-360" target="_blank">How to locate, uninstall, and add an Add-In from the Autodesk App Store in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/No-point-available-to-use-as-reference-to-scale-a-sphere-in-Fusion-360" target="_blank">No point available to use as reference to scale a sphere in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Fusion-This-process-failed-because-of-another-installer-live-update-in-process" target="_blank">Fusion - This process failed because of another installer live update in process.</A> </P> <P><A href="http://knowledge.autodesk.com/article/You-are-receiving-an-Error-Stock-Transfer-is-not-supported-Required-machine-specific-customization-message-when-posting-g-code-from-Fusion-360" target="_blank">You are receiving an “Error: Stock Transfer is not supported. Required machine specific customization” message when posting g-code from Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Drawing-viewed-in-Autodesk-360-appears-differently-than-when-viewed-in-Fusion-360" target="_blank">Drawing viewed in Autodesk 360 appears differently than when viewed in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-insert-a-standard-part-into-a-Fusion-360-design" target="_blank">How to insert a standard part into a Fusion 360 design</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-set-custom-navigation-commands-in-Fusion-360" target="_blank">How to set custom navigation commands in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-scale-a-mesh-according-to-the-world-coordinate-system-in-Fusion-360" target="_blank">How to scale a mesh according to the world coordinate system in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Menu-missing-from-the-main-ribbon-in-Fusion-360" target="_blank">Menu missing from the main ribbon in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/The-body-in-Fusion-360-has-no-volume-or-mass-associated-with-it" target="_blank">The body in Fusion 360 is orange and has no volume or mass associated with it</A> </P> <P><A href="http://knowledge.autodesk.com/article/Fusion-360-is-unable-to-make-a-closed-mesh" target="_blank">Fusion 360 is unable to make a closed mesh</A></P> <P><A href="http://knowledge.autodesk.com/article/Sketch-geometry-offset-from-a-projected-curve-does-not-update-correctly-in-Fusion-360" target="_blank">Sketch geometry offset from a projected curve does not update correctly in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/The-animation-timeline-in-Fusion-360-disappears-after-an-animation-is-reversed" target="_blank">The animation timeline in Fusion 360 disappears after an animation is reversed</A></P> <P><A href="http://knowledge.autodesk.com/article/The-CAM-simulation-dialogue-does-not-remember-previously-used-settings-in-Fusion-360" target="_blank">The CAM simulation dialogue does not remember previously used settings in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/The-show-hide-lightbulb-moves-in-the-Fusion-360-browser-tree" target="_blank">The show/hide lightbulb moves in the Fusion 360 browser tree</A></P> <P><A href="http://knowledge.autodesk.com/article/You-would-like-to-program-a-manual-stop-or-tool-change-in-Fusion-360" target="_blank">You would like to program a manual stop or tool change in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Your-post-processor-will-not-post-the-new-stock-transfer-operations-in-Fusion-360" target="_blank">Your post processor will not post the new stock transfer operations in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/Error-Turning-or-Milling-toolpath-is-not-supported-by-the-post-configuration-after-post-processing-g-code-from-Fusion-360" target="_blank">“Error: Turning (or Milling) toolpath is not supported by the post configuration” after post processing g-code from Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Defining-the-direction-of-a-rotary-axis-in-Fusion-360" target="_blank">Defining the direction of a rotary axis in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Editing-CAM-setup-sheets-created-with-Fusion-360" target="_blank">Editing CAM setup sheets created with Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Focus-is-lost-when-extruding-a-negative-decimal-distance-in-Fusion-360" target="_blank">Focus is lost when extruding a negative decimal distance in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-export-components-from-an-assembly-file-as-individual-files-from-Fusion-360" target="_blank">How to export components from an assembly file as individual files from Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Mesh-bodies-are-not-recognized-in-the-CAM-workspace-of-Fusion-360" target="_blank">Mesh bodies are not recognized in the CAM workspace of Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Moved-translated-components-jump-after-command-in-the-Animation-workspace-of-Fusion-360" target="_blank">Moved/ translated components jump after command in the Animation workspace of Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/PNG-decals-are-scaled-incorrectly-when-inserted-into-Fusion-360" target="_blank">PNG decals are scaled incorrectly when inserted into Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Unable-to-select-which-CAM-operation-to-use-in-Fusion-360" target="_blank">Unable to select which CAM operation to use in Fusion 360</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-get-Graphics-Diagnostic-information-in-Fusion-360" target="_blank">How to get Graphics Diagnostic information in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-move-a-rectangle-from-point-to-point-and-constrain-it-at-it-s-midpoints-in-Fusion-360" target="_blank">How to move a 2d rectangle in a sketch from point to point and constrain it at it´s midpoints in Fusion 360</A></P> <P> </P> <P><FONT size="3"><EM><STRONG>January 2017</STRONG></EM></FONT></P> <P><A title="How to do an automatic Clean Uninstall for Autodesk Fusion 360" href="https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-an-automatic-Clean-Uninstall-for-Autodesk-Fusion-360.html" target="_blank" rel="nofollow noopener noreferrer">How to do an automatic Clean Uninstall for Autodesk Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-edit-a-feature-that-appears-in-the-browser-tree-within-Fusion-360" target="_blank" rel="nofollow noopener noreferrer">How to edit a feature that appears in the browser tree within Fusion 360 </A></P> <P><A href="http://knowledge.autodesk.com/article/How-to-install-a-cloud-post-in-Fusion-360" target="_blank" rel="nofollow noopener noreferrer">How to install a cloud post in Fusion 360</A></P> <P><A href="http://knowledge.autodesk.com/article/Importing-into-Fusion-stitching-and-validating-solids" target="_blank" rel="nofollow noopener noreferrer">Importing into Fusion: stitching and validating solids </A></P> <P><A href="http://knowledge.autodesk.com/article/Missing-upload-file-icon-in-the-Fusion-360-data-panel" target="_blank" rel="nofollow noopener noreferrer">Missing upload file icon in the Fusion 360 data panel </A></P> <P><A href="http://knowledge.autodesk.com/article/Problem-install-Fusion360-on-macOS" target="_blank" rel="nofollow noopener noreferrer">Problem install Fusion360 on macOS</A></P> <P><A href="http://knowledge.autodesk.com/article/What-specific-DXF-filetype-is-output-by-Fusion-360" target="_blank" rel="nofollow noopener noreferrer">What specific DXF filetype is output by Fusion 360? </A></P> <P><A title="You would like to add spring passes to a turning operation in Fusion 360 " href="https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-add-spring-passes-to-a-turning-operation-in-Fusion-360.html" target="_blank" rel="nofollow noopener noreferrer">You would like to add spring passes to a turning operation in Fusion 360 </A></P> Thu, 07 Dec 2017 19:04:49 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/latest-updates-new-knowledge-network-articles-fusion-360/m-p/7009894#M207377 matthew.d 2017-12-07T19:04:49Z