https://forums.autodesk.com/t5/fusion-design-validate-document/evenly-distribute-pattern-along-path/m-p/7042419#M205793 <P>I am trying to copy the highlighted item in the image around a&nbsp;3D projected path, so that each hole has this body perfectly inside of it. The problems with using pattern along a path:</P><P>&nbsp;</P><OL><LI>you cannot accurately control the spacing, like telling it to evenly distribute along the path.</LI><LI>Path direction forces it along every axis, which is what I don't want.</LI></OL><P>How can I do this very accurately?&nbsp;</P> Wed, 26 Apr 2017 02:29:12 GMT Anonymous 2017-04-26T02:29:12Z https://forums.autodesk.com/t5/fusion-design-validate-document/evenly-distribute-pattern-along-path/m-p/7042419#M205793 <P>I am trying to copy the highlighted item in the image around a&nbsp;3D projected path, so that each hole has this body perfectly inside of it. The problems with using pattern along a path:</P><P>&nbsp;</P><OL><LI>you cannot accurately control the spacing, like telling it to evenly distribute along the path.</LI><LI>Path direction forces it along every axis, which is what I don't want.</LI></OL><P>How can I do this very accurately?&nbsp;</P> Wed, 26 Apr 2017 02:29:12 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/evenly-distribute-pattern-along-path/m-p/7042419#M205793 Anonymous 2017-04-26T02:29:12Z https://forums.autodesk.com/t5/fusion-design-validate-document/evenly-distribute-pattern-along-path/m-p/7042494#M205794 <P>Try using a rigid joint for each LED.</P> <P>&nbsp;</P> <P>OR</P> <P>&nbsp;</P> <P>Use the LED as the pattern on the path, then use Combine|Cut to create the holes.</P> Wed, 26 Apr 2017 03:45:37 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/evenly-distribute-pattern-along-path/m-p/7042494#M205794 etfrench 2017-04-26T03:45:37Z