topic Re: Slicer App - DXF for cut output apparently has double lines in Fusion Design, Validate & Document Forum

Slicer App - DXF for cut output apparently has double lines

Anonymous — Wed, 24 May 2017 09:41:15 GMT

Hi,

I made a Rocket in Fusion then used the Slicer App.

Prepared files for laser cutting and out put as a DXF.

Uploaded into PONOKO.com for cut on demand service.

Received a perfect model 1st time.

But a wee note was attached saying the model was double cut as the DXF has double lines.

I've tried to find the double lines but no luck.
How do I avoid this in the future? And how can I search for the double lines.

Ive tried converting to SVG and searching in Inkscape. And also importing into a sketch in Fusion360.

No luck.

I don't run any Autocad programs anymore so don't have a 2D editor.

Any tips on what I can do to avoid double cut output DXF in Slicer. Or how to fix/check it later?

Cheers Lee

Re: Slicer App - DXF for cut output apparently has double lines

Aaron.Magnin — Wed, 24 May 2017 15:50:31 GMT

Thats too bad! Can we see an example dxf from this? I want to check a couple things.

Re: Slicer App - DXF for cut output apparently has double lines

Anonymous — Thu, 25 May 2017 09:47:56 GMT

Hi,

Sure, let me know if you can find any double lines like they say.

I'd appreciate that.

Re: Slicer App - DXF for cut output apparently has double lines

Anonymous — Sat, 27 May 2017 09:41:16 GMT

Hi Aaron,

I was just wondering if you saw anything in the file of note.

Regards Lee

Re: Slicer App - DXF for cut output apparently has double lines

Anonymous — Fri, 30 Mar 2018 19:03:53 GMT

I am just now having this same issue. The DXF doesnt look abnormal or seem to have more than one line, but my machine cuts twice over the same path and crashes. This is after manipulating the DXF in ACAD.