topic Re: Magically moving joint? in Fusion Design, Validate & Document Forum

Magically moving joint?

robduarte — Wed, 14 Jun 2017 04:04:32 GMT

Hi all, I'm trying to create an as-built joint and immediately after creating it, its position jumps over to a new location. I know it's got something to do with having moved components, but I can't figure out how to resolve the issue. I can provide the design file but I'm hoping someone has some answers just by looking at the screencast: https://youtu.be/qEIlt6HXWAY

Thanks for any help

Re: Magically moving joint?

robduarte — Wed, 14 Jun 2017 04:21:21 GMT

Ugh: if I edit the joint, delete the Position, select the position (center of the axle) again (same way I selected the position when I created the joint), then click OK ... it stays in position without jumping as it did in the screencast. I'm going to call this a bug unless someone has some other explanation?

An updated screencast: https://youtu.be/xVBnQ1rGL80

Re: Magically moving joint?

TrippyLighting — Wed, 14 Jun 2017 09:33:52 GMT

@jeff_strater we've seen this over the weekend as well. This is another example.

Re: Magically moving joint?

TrippyLighting — Wed, 14 Jun 2017 09:39:05 GMT

@jeff_strater I've seen this over the weekend here as well. @robduarte's design is another example.

Re: Magically moving joint?

daniel_lyall — Wed, 14 Jun 2017 10:06:17 GMT

There is a couple of guys on the fusion user's facebook group haveing the same problem

Re: Magically moving joint?

jeff_strater — Thu, 15 Jun 2017 00:32:44 GMT

Yes, this is definitely a bug. @robduarte, is there any way we could have this design, so we can investigate? It is strange that an edit will fix it.

@TrippyLighting, I think this is a different problem than in Saeed's post, because in his case, As-Built worked, but regular Joint did not. But, there is clearly something wrong in both cases.

Jeff

Re: Magically moving joint?

TrippyLighting — Thu, 15 Jun 2017 22:42:59 GMT

@jeff_strater nope, same thing. See screencast. Model attached.

If I pick the revolute part on the link it fails. If I pick the revolute point on the base it succeeds.

Edit: You mentioned in Saeeds thread that the assembly behaved wonky. This is what I though you meant.

Re: Magically moving joint?

jeff_strater — Fri, 16 Jun 2017 22:08:51 GMT

filed as FUS-33516. Thanks for reporting this, and sharing the design!

Jeff

Re: Magically moving joint?

jeff_strater — Wed, 23 Aug 2017 14:15:30 GMT

This bug has been fixed in our internal builds. It should appear in an upcoming update.