Corner radius on fusion 360

Anonymous — Wed, 05 Jul 2017 18:47:50 GMT

I have a part I'm trying to model up. Imagine a piece of 7/8 hex stock at 1.5" length. I'm having trubble in this software trying to put a little corner radius on the 6 corners on both ends, 12 total. I need it on just the corners and not the entire sides chamfered or a radius. On the original print the drawing has them on there perfect but the print is old and not used with the same CAD software as fusion 360. Wondering if it can't be done on this software or if it's just me not being able to figure it out l. If there is any unclarification and I'm able to show pictures of what I'm talking about please let me know.

Re: Corner radius on fusion 360

etfrench — Wed, 05 Jul 2017 19:39:29 GMT

Here's one way to do it:

Re: Corner radius on fusion 360

Anonymous — Wed, 05 Jul 2017 20:02:22 GMT

This is far and beyond what I was expecting as a response, kudos to you and thank you

topic Re: Corner radius on fusion 360 in Fusion Design, Validate & Document Forum

Corner radius on fusion 360

Re: Corner radius on fusion 360

Re: Corner radius on fusion 360