topic Re: Sweeping in Fusion 360 in Fusion Design, Validate & Document Forum

Sweeping in Fusion 360

Anonymous — Tue, 25 Jul 2017 14:19:27 GMT

Hey guys, I am new to fusion 360 and i need help.

I was using the sweeping tool and came across 2 different distance fields after I selected the profile and the path and it wont let me go ahead and execute the sweep.

Here is a photo::

I have no idea what to do now so if you have any ideas please reply 😉

thanks

Re: Sweeping in Fusion 360

Anonymous — Wed, 26 Jul 2017 01:46:05 GMT

Regards and welcome!! please can you upload your file here?? or please upload other image showing the path.

Re: Sweeping in Fusion 360

Anonymous — Wed, 26 Jul 2017 02:50:16 GMT

Now I can observe your problem, I could not see well the image you attached, these choosing as a path a closed outline of a sketch that is also a copy of the one you want to sweep, is a little further to apply the command in this way. You must leave a single path on which the profile you chose can be swept away. Eliminate the top or bottom line of the sketch where you have the path and do the test!

Re: Sweeping in Fusion 360

Anonymous — Wed, 26 Jul 2017 03:13:42 GMT

Look this screencast to see what i say. I hope you solve with this example.