topic Re: How I draw this in Fusion Design, Validate & Document Forum

How I draw this

ernkla — Sun, 10 Sep 2017 16:35:22 GMT

This is not s

This is not solid only sketch how ı made this to solid im try hardly but how?

Re: How I draw this

SaeedHamza — Sun, 10 Sep 2017 17:29:46 GMT

Hi,

Use the Patch command from the Patch environment to create faces, and then stitch them to get a solid body

Regards

Re: How I draw this

SaeedHamza — Sun, 10 Sep 2017 17:39:05 GMT

Here is a screencast to show you what I mean

If you have only lines, and no profiles ( because the sketch is in 3d ) then turn of the chain selection in the patch dialog box and select the lines you want to create a patch between them

Regards

Re: How I draw this

ernkla — Sun, 10 Sep 2017 18:10:27 GMT

Im already do it on side but middle this is not work becose its spherical and complex this is not work in this case

Re: How I draw this

SaeedHamza — Sun, 10 Sep 2017 18:26:06 GMT

could you please attach the file so that I can try

Regards

Re: How I draw this

ernkla — Mon, 11 Sep 2017 08:10:34 GMT

Here you are.

Good luck 😄

Note (I want 1 peace not 2 peace on top)

You wil understand this word when you drawing

And sorry for my bed english

Re: How I draw this

TrippyLighting — Mon, 11 Sep 2017 09:31:08 GMT

Before attempting to design anything with Fusion 360 you may want to go through the video tutorials in the Support and Learning sections.

I am not sure these written documentation is available in any other language so Videos might be of more help to you.

You deleted the reference geometry that these sketch were drawn/sketched on and have 4 yellow highlighted items in the timeline.

Re: How I draw this

TrippyLighting — Mon, 11 Sep 2017 09:49:12 GMT

Re: How I draw this

ernkla — Tue, 12 Sep 2017 17:19:08 GMT

I dont want this lines becose ı will print this and how ı infill this

Re: How I draw this

SaeedHamza — Tue, 12 Sep 2017 17:51:34 GMT

Edit : use the loft between point and middle curve to make the lines you wanna get rid of 1 line, but I don't think that you can get rid of the whole thing

I'll make a screencast

Regards

Re: How I draw this

SaeedHamza — Tue, 12 Sep 2017 17:58:42 GMT

Re: How I draw this

SaeedHamza — Tue, 12 Sep 2017 18:10:09 GMT

Here is a screenshot that shows that you need a fillet ( in the black areas ) in order to get something smooth like this

Re: How I draw this

ernkla — Tue, 12 Sep 2017 18:30:33 GMT

Sorry but it not work and how ı infill this

Re: How I draw this

SaeedHamza — Tue, 12 Sep 2017 18:35:55 GMT

@ernkla wrote:

Sorry but it not work and how ı infill this

When you say it doesn't work, do you mean you can't create or is it not what you want?

And about the fill, use the stitch command in the patch worksapce

Re: How I draw this

ernkla — Tue, 12 Sep 2017 19:27:26 GMT

I mean I fillet this edges but it not smooth as your model

Re: How I draw this

SaeedHamza — Tue, 12 Sep 2017 19:28:57 GMT

Check this, it will help you do it

Re: How I draw this

ernkla — Tue, 12 Sep 2017 19:56:55 GMT

Thank you for all thats work