topic Re: NEED ADJUSTMENT ON BEND TABLE in Fusion Design, Validate & Document Forum

NEED ADJUSTMENT ON BEND TABLE

bryan5 — Sat, 23 Sep 2017 22:14:36 GMT

The Default angle that is called out in the bend table in the drawing is the outside angle. For the Trumpf press brake I need to be able to label the inside angle. For me this is critical in MFG drawings for the shop floor. I can enter it manually but I rather the software drive the call out instead of me to avoid human error. Is there a way to do this or does this need to be an enhancement request?

On the attached .pdf it shows the bend table calling out 75 degrees for bend 4 which I need to have 105 degrees and 95 degrees for bend 3 which I need to call out 85 degrees. If my operator were to enter 75 and 95 respectively I would not get the profile shown.

Thank you

Re: NEED ADJUSTMENT ON BEND TABLE

masa.minohara — Mon, 25 Sep 2017 03:00:45 GMT

Hi @bryan5,

Thank you for posting! To my knowledge, there is not a way to do it in the current version of Fusion 360 but I may be missing something so I'll check with the team and circle back here soon as I have more information to share!

Re: NEED ADJUSTMENT ON BEND TABLE

masa.minohara — Mon, 25 Sep 2017 06:08:31 GMT

Hi @bryan5,

I just heard back from the development team and confirmed that there is no way to do it at the moment. We have logged it in our internal system as FDWG-8816.

Thank you for your feedback!

Re: NEED ADJUSTMENT ON BEND TABLE

bryan5 — Mon, 25 Sep 2017 11:49:17 GMT

Thank you. I will check back in a few weeks to see status.

Re: NEED ADJUSTMENT ON BEND TABLE

Nikola_Perunmoto — Sat, 29 Dec 2018 11:59:22 GMT

Hi, any news on this subject?

Cheers,

Nikola

Re: NEED ADJUSTMENT ON BEND TABLE

Anonymous — Wed, 05 Feb 2020 13:25:49 GMT

i would also need this options.

i dont understad how this has not been done yet in 3 years. It looks like a simple feature to add. ? Or m i missing something.

Re: NEED ADJUSTMENT ON BEND TABLE

chris — Mon, 07 Aug 2023 09:13:29 GMT

I also need the other angle for my pressbrake.

This update would be very helpfull!