topic Re: I'm getting hung up on one tutorial. Banana hook. in Fusion Design, Validate & Document Forum

I'm getting hung up on one tutorial. Banana hook.

Anonymous — Mon, 29 Jan 2018 01:52:01 GMT

I'm obviously new to Fusion 360. I've been working my way through the tutorials and the lesson on projecting a surface then breaking the links to the projected lines is giving me some trouble. I'm not asking for the easy answer, I've tried to get this right more than a dozen times over many hours trying to figure this out by myself. I've been back over the lessons that should have given me the answers but I'm not getting the results shown on the tutorial pages. The project is Banana hook, basic instruction. any help would be greatly appreciated. Thanks-

Re: I'm getting hung up on one tutorial. Banana hook.

jhackney1972 — Mon, 29 Jan 2018 03:43:22 GMT

Take a look at my screencast and see if this helps you find the projected line and then "Break Link" to convert it to a normal line. After this is done to both sides, you can easily add the sketch fillet. Once the fillets are in place you can use their sketch centers to add the sketches for the holes.

Re: I'm getting hung up on one tutorial. Banana hook.

Anonymous — Mon, 29 Jan 2018 23:05:06 GMT

Thank you John!