topic Re: Drawing cut view issue in Fusion Design, Validate & Document Forum

Drawing cut view issue

dmitrijs.kulikovs — Tue, 02 Jul 2024 09:54:12 GMT

When longitudinal cut is made view of part is shaded.

Re: Drawing cut view issue

liang_chen — Tue, 02 Jul 2024 10:13:21 GMT

It could be dataset specific issue. Please share the dataset, or you can share the link of dataset by email. Thanks

liang.chen@autodesk.com

Re: Drawing cut view issue

dmitrijs.kulikovs — Tue, 02 Jul 2024 10:19:49 GMT

Yesterday everything was OK.
Not sure what do you mean "share the dataset, or you can share the link of dataset by email"
May I ask you to give some instructions.

Re: Drawing cut view issue

liang_chen — Tue, 02 Jul 2024 10:22:27 GMT

Please share the link of file with us, and allow downloading. Thanks

Re: Drawing cut view issue

dmitrijs.kulikovs — Tue, 02 Jul 2024 10:57:40 GMT

I have send you link.
But this problem with absolutely newly opened drawing.

Re: Drawing cut view issue

liang_chen — Tue, 02 Jul 2024 12:09:50 GMT

Thanks for sharing the dataset. Checking the details of the 3D design, body 10 and 11 are bad body in UKP210-J7. Showing as the snapshot, the solid body is open and the face is too thin. It is not a quailfied solid body. Please rebuild these bodies in 3D design. Is this body created in Fusion, or imported from other file format ?

In drawing, you can hide the bad bodies to get the correct section view, showing as the second snapshot. Hope it works for you.

Re: Drawing cut view issue

dmitrijs.kulikovs — Tue, 02 Jul 2024 14:55:50 GMT

Fanstastic. Thanks a lot.
Never come across such problem.

This bearing housing I don't remember where was download, but 99% downloads are made through "Insert manufacturer part"