https://forums.autodesk.com/t5/fusion-design-validate-document/overlapping-sheet-metal-flanges/m-p/7883549#M169632 <P>File&gt;Export and then Attach your *.f3d file here to see how this issue is resolved.&nbsp;</P> Mon, 26 Mar 2018 10:29:55 GMT TheCADWhisperer 2018-03-26T10:29:55Z https://forums.autodesk.com/t5/fusion-design-validate-document/overlapping-sheet-metal-flanges/m-p/7882770#M169631 <P>I'm trying to create a part where 2 flanges of a sheet metal part overlap so that they can be fastened together and create a more rigid box. The attached image shows what I'm trying to do. Unfortunately, the tabs get fused together and the model cannot be unfolded. Is there any what to prevent this or should I be using some other method that will avoid this?</P><P>&nbsp;</P><P>Thanks</P><P>&nbsp;</P><P>Erik</P> Mon, 26 Mar 2018 02:09:56 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/overlapping-sheet-metal-flanges/m-p/7882770#M169631 erikscott128 2018-03-26T02:09:56Z https://forums.autodesk.com/t5/fusion-design-validate-document/overlapping-sheet-metal-flanges/m-p/7883549#M169632 <P>File&gt;Export and then Attach your *.f3d file here to see how this issue is resolved.&nbsp;</P> Mon, 26 Mar 2018 10:29:55 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/overlapping-sheet-metal-flanges/m-p/7883549#M169632 TheCADWhisperer 2018-03-26T10:29:55Z