topic Re: Slicer for Fusion 360 "Mesh could not be imported" in Fusion Design, Validate & Document Forum

Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Mon, 26 Mar 2018 20:16:26 GMT

Greetings! the problem of importing files. If you import any (.stl or obj) file, an error occurs - "Mesh could not be imported". This happens on my two pc. (windows 7/64b). But on the laptop the program works stably (although it's less power). All visual c ++ and net framework libraries reinstalled. When importing using fusion 360 "File has failed to open on Slicer for Fusion 360, please try again", but on other computers these files are opened without problems.

really looking forward to your help.

Re: Slicer for Fusion 360 "Mesh could not be imported"

TrippyLighting — Sun, 01 Apr 2018 10:39:25 GMT

I think we need to have a better understanding of what exact workflow you are following,.

I've worked with slicer only once, but it is my understanding that slicer creates meshes from solid bodies in Fusion 360.

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 26 Apr 2018 22:35:52 GMT

Hey Im just wondering if you got the problem fixed, I. have the same issue and I'm struggling to get a solution !

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Fri, 27 Apr 2018 00:01:49 GMT

Just to mention, I literally used Slicer for the past 5 months fine and then I updated my computer and I feel that it isn't letting me add any new STL or OBJ files.

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Fri, 27 Apr 2018 08:54:14 GMT

Hello,

did you fixed your issue because i have the same.

i try to import a .obj model that i already imported before in slicer without any issue and i get the message "mesh could not be imported" and then it is causing Slicer to shut down...

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Fri, 27 Apr 2018 11:47:17 GMT

I found the solution ! looking to the old slicer 123d make known issues :

in my file PATH there was a special character (french character !) :

"C:\Users\guill\Desktop\sculpture cp\modèles 3d\untitled.obj"

I corrected it by removing the "è" and it works again !

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Sat, 28 Apr 2018 09:18:22 GMT

Hey thanks for quick reply! When I choose to look at the path it only shows me the folders that it has been placed in. It doesn't show me the file type ( OBJ ) for example. how do I see the full path and edit it. ?
Thanks for your help

@Anonymouswrote:
I found the solution ! looking to the old slicer 123d make known issues :
in my file PATH there was a special character (french character !) :
"C:\Users\guill\Desktop\sculpture cp\modèles 3d\untitled.obj"
I corrected it by removing the "è" and it works again !

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Wed, 02 May 2018 17:13:01 GMT

Olá, sou brasileiro;

As pastas em que esta o arquivo .OBJ que deseja importar não podem conter nenhum caracter especial.

Ex.: Descktop/Papelão-Para-Esculturas/Ferrari/Ferrari.OBJ

Ex.: Descktop/Papelao-Para-Esculturas/Ferrari/Ferrari.OBJ

Apenas isso e problema resolvido 🙂

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Mon, 29 Oct 2018 19:08:44 GMT

Hello guys,

I found out this solution on this page https://parameterizing.wordpress.com/2016/11/28/import-failed-123d-make/ and it worked fine for me!

Basically what you have to do is just save your file on a pen drive and open the file from the pen.

Re: Slicer for Fusion 360 "Mesh could not be imported"

jmigneauxXAGKC — Tue, 13 Nov 2018 15:43:55 GMT

OMG so simple I didn't noticed it... I'm french too and yeah accents in your files names block Slicer to access to the right path I guess.

Thank you Guillaume !!! Merci ! 😄

@Anonymous wrote:
I found the solution ! looking to the old slicer 123d make known issues :
in my file PATH there was a special character (french character !) :
"C:\Users\guill\Desktop\sculpture cp\modèles 3d\untitled.obj"
I corrected it by removing the "è" and it works again !

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Wed, 13 Feb 2019 17:44:58 GMT

Merci beaucoup!!!!

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 04 Apr 2019 19:18:33 GMT

I can't belive it, works!! Thanks

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 09 May 2019 03:34:41 GMT

still not work for me. I put it in D:\ or in my USB disk, no non-English letters in the folder names at all. but the problem remains. this makes this software can only work with the built-in models.

why this?

@Anonymous wrote:

I found the solution ! looking to the old slicer 123d make known issues :

in my file PATH there was a special character (french character !) :

"C:\Users\guill\Desktop\sculpture cp\modèles 3d\untitled.obj"

I corrected it by removing the "è" and it works again !

Re: Slicer for Fusion 360 "Mesh could not be imported"

jodom4 — Thu, 09 May 2019 17:36:40 GMT

Hey instantlx,

Slicer is currently in maintenance. Here's a post with more information on that, it might also have some helpful tips: https://forums.autodesk.com/t5/fusion-360-support/slicer-for-fusion-360-topics/td-p/8460043

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 22 Aug 2019 15:17:52 GMT

Aveces es cuestión de ortografía , sugiero revisar la ortografía del nombre del archivo

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 22 Aug 2019 15:35:20 GMT

Gracias! Si, definitivamente mi carpeta fuente tenía la letra Ñ y ese era el problema

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 14 Nov 2019 02:27:50 GMT

Olá Yuri, gostaria muitooo de te agradecer, estava com esse problema, e nenhuma ajuda resolvia. Com apenas seu comentário tudo deu certo! Obrigada mesmo ahahaha

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Mon, 02 Dec 2019 13:00:45 GMT

Esta es la respuesta correcta!!

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Wed, 04 Dec 2019 19:52:48 GMT

me sirvio perfecto....

Re: Slicer for Fusion 360 "Mesh could not be imported"

Anonymous — Thu, 12 Dec 2019 21:34:03 GMT

It crashes even if you use _underscore in the filename, try to use only letters and digits.