Hole Table Mod

kylematthew159 — Thu, 19 Apr 2018 18:34:09 GMT

Hi, I'm still learning F360 and today I got to try out the new hole command and I first want to say that it is a major improvement! The issue I'm having is that the drill diameter for the thread I need to make are not correct per the standards that I am used to working with. Some drills don't even exist for some of the sizes that fusion picks as a drill size. An example is if you want to create a 1/4-28 threaded hole, it tells you the hole size is a .216 drill. This does not exist and the correct size is a .213 (#3) drill. Personally I would rather the hole just be made to the size of the tap because it makes for easy chamfering when in CAM later on.

The question is, can I modify whatever hole table / library fusion 360 uses?

Thanks.

Re: Hole Table Mod

rishabh.bisht — Fri, 20 Apr 2018 06:46:22 GMT

Hi @kylematthew159,

Thanks for taking the time to share your feedback, appreciate it!

I will raise this concern about the standards with the team. Thanks for reporting it.

To answer your question, No, we do not support custom standards as of now in Hole/Thread command.
But feel free to make a post in the IdeaStation regarding the same. If your idea gets enough traction, it can soon get implemented. 🙂

topic Re: Hole Table Mod in Fusion Design, Validate & Document Forum

Hole Table Mod

Re: Hole Table Mod