topic Re: create flat pattern in Fusion Design, Validate & Document Forum

create flat pattern

tahahammami92 — Sun, 22 Jul 2018 10:41:05 GMT

hi i need help i wanna create flat pattern thank you

davebYYPCU — Sun, 22 Jul 2018 11:27:19 GMT

Ok, heard you the first time,

but not with Fusion 360,

did you do it in Meshmixer?

tahahammami92 — Sun, 22 Jul 2018 11:33:20 GMT

o it with what application can do it

tahahammami92 — Sun, 22 Jul 2018 11:37:51 GMT

no i dont try with mesh mixer but can you do it and send me the file

chrisplyler — Sun, 22 Jul 2018 17:33:59 GMT

That sounds like a request for contract work.

TheCADWhisperer — Sun, 22 Jul 2018 19:29:47 GMT

It would probably be best to attach original *.f3d rather than *.stp

See attached file.

tahahammami92 — Sun, 22 Jul 2018 21:13:54 GMT

thank you can you plz show me how you do it

TheCADWhisperer — Sun, 22 Jul 2018 21:20:18 GMT

I am waiting for @jodom4 to demonstrate how to do this with Slicer from your other thread.

My proposal for AU was rejected for this year, so I am holding onto some advanced techniques to try again next year.

tahahammami92 — Sun, 22 Jul 2018 21:22:51 GMT

plz man i need to learn how to do it ? plz send me vedio

TheCADWhisperer — Sun, 22 Jul 2018 21:30:07 GMT

I used Autodesk MeshMixer.

Another option (easiest) would be Autodesk Inventor Beta http://beta.autodesk.com

tahahammami92 — Sun, 22 Jul 2018 21:32:24 GMT

can you plz send me vedio descripe how you do it plz man i need it to learn my email is tahahammami92@gmail.com

TheCADWhisperer — Mon, 23 Jul 2018 14:06:43 GMT

This AU Video shows a technique using ExactFlat software.

tahahammami92 — Mon, 23 Jul 2018 14:14:58 GMT

no your file is not corrrect and you can screen you pc and show me how you do it ???

jodom4 — Mon, 23 Jul 2018 19:41:56 GMT

I replied in the other thread. I was mistaken, Slicer can only flatten by panelizing the surface, it doesn't unroll along seams.

I'm bummed your AU class didn't make the cut, this would be a useful trick!