topic Re: NEWB : Radial Pattern Copy in Fusion Design, Validate & Document Forum

NEWB : Radial Pattern Copy

Anonymous — Fri, 14 Sep 2018 12:28:12 GMT

Greetings all. Experienced 3D visualiser, but absolute F360 NEWB:

Aim:
I want to make a radial array of 6 columns (cylinders) with a Y up orientation. I then want to be able to rotate the original cylinder on the Z axis and have all other cylinders in the pattern to rotate to match ( as 'instances'). The original cylinder was set up as a component and moved to X = -100.

What would be the the correct approach for this please?

Re: NEWB : Radial Pattern Copy

Anonymous — Fri, 14 Sep 2018 12:46:37 GMT

Ah... the joy of scratching one's head and fumbling around... then finally posting to a forum... and then immediately stumbling across a soluion : )

OK it seems that if I radial pattern the components, but rotate the original body... I'm getting what I want.
But I'd still very much appreciate advice on the best / correct method to approach this.

Re: NEWB : Radial Pattern Copy

whittakerdw — Fri, 14 Sep 2018 12:56:07 GMT

What I was able to come up with was drawing the first body and then using circular array and adjusting the desired settings.

Re: NEWB : Radial Pattern Copy

Anonymous — Fri, 14 Sep 2018 14:20:29 GMT

Thanks for the response, appreciated.

This is what I ended up doing...

Is there a better way?

Radial patterns with master rotation

Re: NEWB : Radial Pattern Copy

HughesTooling — Fri, 14 Sep 2018 18:00:28 GMT

Here's another way using a sketch then revolve and finally a pattern. See attached file. Edit, updated file as I forgot to set the angle of the cylinders in the sketch.

Mark

Re: NEWB : Radial Pattern Copy

Anonymous — Fri, 14 Sep 2018 18:31:35 GMT

Thanks both - your input and expertise is appreciated : )