topic Re: Fusion 360 for engineers tutorial videos in Fusion Design, Validate & Document Forum

Fusion 360 for engineers tutorial videos

whittakerdw — Mon, 17 Sep 2018 16:05:52 GMT

Where is the video between part 1 lesson 11 and part 2 lesson 11. There are a lot of steps that are done between those two videos and I can't seem to find the video between them. The updated part is provided but the author talks as if these steps were done in a previous step. If they were, I would find it more beneficial to do the steps myself and learn from that instead of downloading the part with the steps already done.

Re: Fusion 360 for engineers tutorial videos

jodom4 — Mon, 17 Sep 2018 16:54:45 GMT

Hey whittakerdw,

Can you provide a link? I'm not sure which videos you're talking about.

Re: Fusion 360 for engineers tutorial videos

whittakerdw — Mon, 17 Sep 2018 17:00:32 GMT

The link for the last video in part 1

https://f360ap.autodesk.com/courses/fusion-360-for-engineers-part-1/lessons/lesson-11-upright-creation-part-4

The link for the first video in part 2

https://f360ap.autodesk.com/courses/fusion-360-for-engineers-part-2/lessons/lesson-11-as-built-joints

The last thing shown in the last video

The first thing shown in the following video

Re: Fusion 360 for engineers tutorial videos

whittakerdw — Mon, 17 Sep 2018 17:02:05 GMT

Part 1

https://f360ap.autodesk.com/courses/fusion-360-for-engineers-part-1

Last video of this section

Part 2

https://f360ap.autodesk.com/courses/fusion-360-for-engineers-part-2

First video of this section

Re: Fusion 360 for engineers tutorial videos

Anonymous — Sat, 28 Sep 2019 16:09:26 GMT

Good day!

I want to follow on this problem

I watched all the videos of fusion 360 for engineers part 1, from lessons 1 to 11 (last lesson of part 1)

Then I started watching fusion 360 for engineers part 2, but the videos started at lesson 11. Is this just a numbering error or lesson 1 to 10 is missing? I think there are some videos that has been skipped since there are things on the part being explained that has been modified already, which we have not seen being done.

Hope for your prompt answer!

Many Thanks

Marlon L. Banal

Re: Fusion 360 for engineers tutorial videos

jesse.pangburn — Thu, 12 Mar 2020 02:22:14 GMT

Why is this marked as the "solution"? This is just restating the problem.