topic Re: HELP ! - using thread features between two component not matching ,, in Fusion Design, Validate & Document Forum

HELP ! - using thread features between two component not matching ,,

halimidris91 — Fri, 09 Nov 2018 15:42:27 GMT

how to fix this ? need help on this thread.. I.I'm gonna 3d Print it .. but from my view the thread not matching between two component..

I had select M8x 1.25for both using Thread Tools..

Re: HELP ! - using thread features between two component not matching ,,

mavigogun — Fri, 09 Nov 2018 16:01:23 GMT

Check out this video- addresses more topical issues than just thread alignment.

Re: HELP ! - using thread features between two component not matching ,,

etfrench — Fri, 09 Nov 2018 17:11:04 GMT

I haven't watched the video yet, but one way to create perfectly matched threads is to:

Join the bodies.
Create the threaded holes.
Split the bodies.

Another:

Create a tube with an inside diameter for the threads and an outside diameter larger than the threads.
Thread the hole.
Position the tube in the two bodies/components.
Split the tube.
Join each end to its respective component.

You'll also need to add chamfers.

Re: HELP ! - using thread features between two component not matching ,,

halimidris91 — Fri, 09 Nov 2018 18:20:08 GMT

For the bodies.
It's 2 components already.
Is there a way to join the component together ?

Thank you for another.. will work on that .

@etfrench wrote:
I haven't watched the video yet, but one way to create perfectly matched threads is to:
Join the bodies.
Create the threaded holes.
Split the bodies.
Another:
Create a tube with an inside diameter for the threads and an outside diameter larger than the threads.
Thread the hole.
Position the tube in the two bodies/components.
Split the tube.
Join each end to its respective component.
You'll also need to add chamfers.

Re: HELP ! - using thread features between two component not matching ,,

halimidris91 — Mon, 12 Nov 2018 06:12:49 GMT

thank you for sharing this vids. I have go through this, but its a little complicated because the video itself is 30 min..